321386

Philips hi478 Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
1 Always unplug cord from electrical outlet and set the Steam
Control to position 0.
2 Fill the removable water reservoir to the maximum level.
Do not use vinegar or other descaling agents to self clean your iron.
3 Plug cord in electrical outlet.
4 Set the Temperature Control to MAX.
5 Allow iron to heat up for two minutes.
6 Turn Temperature Control to Min and unplug iron when the
Amber Pilot Light has gone out.
7 Hold the iron over the sink,press and hold the self-clean
button and gently shake the iron.
4
Steam and boiling water will come out of the soleplate. Impurities and
scale (if any) will be flushed out.
8 Release the self-clean button as soon as all the water in the
reservoir has drained out.
Repeat the self-cleaning process if the iron still contains a lot of
impurities.
After self-cleaning
- Plug in the iron and reheat for 2 minutes.This will enable interior of
the iron to dry before storing.
- Unplug the iron when the Amber Pilot Light has gone out.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down completely before you store it.
Maintenance and Storage
1 Set the Temperature Control to Min position. Unplug cord
from electrical outlet and let the iron cool down completely.
2 Wipe scale and any other deposits off the soleplate with a
damp cloth and a non-abrasive (liquid) cleaner.
Keep the soleplate smooth: avoid hard contact with metal objects.
3 Regularly rinse the removable water reservoir with water.
Empty the removable water reservoir after cleaning or before
storing.
7
Shot of Steam
This function can also be used when you hold the iron in vertical
position.
A powerful "shot" of steam helps remove stubborn creases.
The Shot-of-Steam function can only be used at temperature settings
between and MAX.
1 Press and release the Shot-of-Steam button.
Wait for a while before using the button again to avoid spluttering.
Never direct the steam towards people.
Anti-Calc Filter
◗ The built-in Anti-Calc Filter reduces deposit of scale and helps
prolong life of the iron.
Auto-off
An electronic safety device will automatically switch off the iron if it has
not been moved for a while.
◗ To indicate that the iron has been switched off,the Red Auto-
Off Pilot Light will start blinking.
In a horizontal position, this will happen after 30 seconds.
In a vertical position,this will happen after 8 minutes.
To heat up the iron again:
- Pick up the iron or move it slightly.
- The Red Auto-Off Pilot Light will go out.The Amber Pilot Light will
come on.
- When the Amber Pilot Light has gone out and comes on again, the
iron is ready for use.
sELF-Self-Cleaning
The self-clean function removes scale and impurities.
Use the self-clean function once every two weeks.If the water in your
area is very hard, the self-clean function should be used more
frequently.
6
HI478/IRON.FA 1/13/00 2:35 PM Page 10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hi478 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hi478 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info