321386

Philips hi478 Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
Steam Ironing
Bell Vent Pattern on soleplate steams and presses twice in one
a c t i o n .
M a k e sure that there is enough water in the remov a b le water reservo i r.
1 Set the Temperature Control to the recommended position.
See section 'Setting the temperature.'
2 Set the Steam Control to the appropriate steam position.
- 1-2 for moderate steam (temperature settings to )
- 3-4 for maximum steam (temperature settings to MAX)
Steaming will start as soon as the set temperature has been reached.
Other features
Spraying
To remove stubborn creases at any temperature, make sure that
there is enough water in the removable water reservoir.
1 Press the spray button a couple of times to moisten the fabric.
Drip Stop System
The Drip Stop System continuously monitors soleplate temperature
and automatically shuts off water supply if iron is too cool to steam.
Drip Stop System virtually eliminates water dripping from soleplate and
onto your fabric.
IMPORTANT:The iron will automatically stop steaming at insufficient
temperatures.This is due to the Drip Stop System’s valve closing when
the temperature of the soleplate is too cool to produce steam.
5
3 Press and hold the removable water reservoir release buttons
and remove the removable water reservoir.
4 Open the filling cap.
5 Pour tap water into the removable water reservoir up to the
maximum level.
Do not fill the reservoir beyond the MAX indication.
6 Wipe off any excess water before plugging iron into outlet.
If the tap water in your area is very hard, we advise you to mix it with
an equal portion of distilled water, or to use distilled water only.
Do not use vinegar, starch or chemically descaled water.
7 Press to close the filling cap (click!) and put the removable
water reservoir onto the iron.
Setting the temperature
1 Put the iron on its heel.
2 Plug cord in electrical outlet.
3 Set the Te m p e r a t u re Control to the re q u i red ironing temperature
by turning it to the ap p ropriate temperature indicator.
- Check the garment label for the required ironing temperature:
Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)
Silk
Wool
Cotton, linen
- If you do not know what kind of fabric(s) the garment is made of, try
to determine the right ironing temperature by ironing a part that will
be invisible when you wear the garment.
- S i l k ,woolen and synthetic materi a l s :iron the reve rse side of the fabri c
to prevent shiny spots.To prevent stains,avoid using the spray function.
- Start ironing the articles that require the lowest ironing temperature
first, such as those made of synthetic fibers.
4 Start ironing when the Amber Pilot Light has first gone out and
then comes on again.
The Amber Pilot Light will come on from time to time during ironing.
4
HI478/IRON.FA 1/13/00 2:35 PM Page 8
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hi478 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hi478 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info