Categories
467858

Philips HD 4740 Manual

8
Zoom out
Zoom in
Previous page
1/36
Next page
4 Add water to the level indicated on the scale inside the inner pot that corresponds to the
number of cups of rice used. Then smooth the rice surface. (Fig. 3)
For instance, if you cook 2 cups of rice, add water up to the 2-cup level indicated on the scale.
Note: The level marked inside the inner pot is just an indication; you can always adjust the water level and
your own preference.
5 Press the release lever to open the lid.
6 Put the inner pot in the rice cooker. Check if the inner pot is in proper contact with the
heating element (Fig. 4).
Make sure that the outside of the inner pot is dry and clean and that there is no foreign residue on
the heating element or the magnetic switch.
The rice cooker will not operate without the inner pot or when the pot is not properly in contact
with the heating element.
7 Close the lid of the rice cooker, put the plug in the wall socket and switch on the mains.
You will hear a beep.
8 Press the COOK/QUICK button (Fig. 5).
, The cook light goes on and the cooking process starts.
, You can switch to quick cooking within the rst 5 minutes of the cooking process by pressing
the COOK/QUICK button twice.
, The display counts down in minutes (10, 9, 8 etc.) during the last 10 minutes of the cooking
process.
, When the cooking process is nished, you will hear a beep. The cook or quick light goes out
and the keep-warm/reheat light starts to burn continuously to indicate that the rice cooker
has automatically switched to the keep-warm mode (Fig. 6).
The table below shows the approximate cooking time of each function. The actual cooking time may
vary depending on voltage, room temperature, humidity and amount of water used.
Function Approximate cooking time
(minutes)
Approximate time until ready
(minutes)
Regular 30-40 10
Quick 20-30 10
Congee 30-240 not applicable
Reheat 23 20
9 Open the lid and stir the rice to loosen it (Fig. 7).
For the best results, do this just after the rice cooker has switched to keep-warm mode. Then close
the lid rmly. Stirring the rice allows excess steam to escape. This will give ufer rice.
10 Press the OFF button to cancel the cooking process, the preset setting or the keep-warm
mode. The cook light will start to blink (Fig. 8).
The rice cooker has a backup memory that retains the last selected mode, function and settings in
case of a power failure. If the power supply is restored within 2 hours, the interrupted cooking
process will continue or the timer function will be reactivated.
Always press the OFF button before unplugging the appliance, as otherwise the last selected
function and settings will resume when the rice cooker is plugged in again.
11 Unplug the rice cooker to switch it off.
8
… 8 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD 4740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD 4740 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info