506093
55
Zoom out
Zoom in
Previous page
1/61
Next page
ADSL2/2+ Modem Router
www.phicomm.com
50
Appendix A: Troubleshooting
Appendix A: Troubleshooting
1. How do I restore my Modem Routers configuration to factory default settings?
With the router powered on, press the Reset button on the rear panel, keep holding it for about 5
seconds then release it.
2. Why I cannot login the Modem Router’s web management page?
Make sure the computer goes into the LAN port of the router.
Check the computer’s IP address; make sure the IP address is obtained automatically, for
details please refer to the section of Configure the Computers IP Address in this manual.
Make sure you put 192.168.1.1 into the address bar, not the search bar.
Check your web browser; make sure the Proxy server is unchecked. Take Internet Explorer as
an example, go to Tools>Internet Options>Connections>LAN Settings, uncheck Use a
proxy server for your LAN.
If it tells you the username or password is error, and you cannot remember the new one,
please reset router by pressing reset button for at least 5 seconds, and then try to login with
default username and password (admin/admin).
3. What can I do if I forgot my login password for the Modem Routers web management
page 192.168.1.1?
Restore the Modem Router to its factory default settings, please refer to question 1.
Use the default username and password: admin, admin.
Reconfigure the Modem Router after you reset it successfully.
4. What can I do if I cannot access the Internet?
Make sure all the connectors are connected properly, including the telephone line, Ethernet
cables and power adapter.
Try to restart your Modem Router and computer.
Try to login to the web management page of the Modem Router. If you can, please check
the status of DSL light on the front panel of the Modem Router:
a) DSL light is solid on, please refer to question 5.
b) DSL light is blinking or off, please contact with your Internet Service Provider to check your
ADSL service.
If you cannot open the Modem Routers web management page, please try to reset the Modem
Router, refer to question 1.
5. What can I do if the DSL light is solid on, but the Internet light is off?
Log in the Modem Routers web management page 192.168.1.1, consult your ISP and make sure
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm FD-222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm FD-222 in the language / languages: English as an attachment in your email.

The manual is 5,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info