523546
29
Zoom out
Zoom in
Previous page
1/75
Next page
Cerberus ADSL2+ Wi-Fi (P 6331-5)
29
LAN Group x configuration
LAN Group Configuration allows you to configure settings for each LAN group. Notice
that you can also view the status of advanced services that can be applied to a LAN
group. Green indicates that the service is enabled, while red indicates that the service is
disabled.
Unmanaged
Unmanaged is a state when the LAN group is not configured and no IP address has been
assigned to the bridge.
Obtain IP address automatically
When this function is enabled, your router acts like a client and requests an IP address
from the DHCP server on the LAN side. You can release/renew an IP address from the
DHCP server using the Release and Renew buttons. Assigned IP Address and
Netmask will be displayed fields.
PPP IP Address
Enables/disables PPP unnumbered feature. Entered IP Address should be different but
within the same subnet as the WAN-side IP address.
Use the following Static IP address
This field enables you to change the IP address of the router.
IP Address – The default IP address of the router (as shown) is 192.168.1.1.
Netmask The default subnet mask of your router is 255.255.255.0. This subnet allows
the router to support 254 users. If you want to support a larger number of users you can
change the subnet mask.
Default Gateway The default gateway is the routing device used to forward all traffic
that is not addressed to a station within the local subnet. Your ISP provides you with the
IP address of the default gateway.
Host Name The host name is used in conjunction with the domain name to uniquely
identify the router. It can be any alphanumeric word that does not contain spaces.
Domain The domain name is used in conjunction with the host name to uniquely
identify the router. To access the web pages of the router you can type 192.168.1.1 (the
IP address) or mygateway1.ar7 (Host Name.Domain).
Enable DHCP Server Enables/disables DHCP. By default, your router has the DHCP
server (LAN side) enabled. If you already have a DHCP server running on your network,
you must disable one of the two DHCP servers.
29

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6331-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6331-5 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info