PENTAGRAM Cerberus [P 6361]
Wireless Settings
Basic Settings
Enable Wireless: Check to enable the Router’s wireless features; uncheck to disable it. You
can also press the WPS button to turn on/off the wireless function.
Network Mode: Select one mode from the following. The default is 11b/g/n mode.
•11b mode: Allow the wireless client to connect with the device in 11b mode at the
maximum speed of 11Mbps.
•11g mode: Allow the 11g/11n-compliant client device to connect with the AP at the
maximum speed of 54Mbps.
•11b/g mixed mode: Allow the 11b/g-compliant client device to connect with the AP with
auto-negotiation speed, and 11n wireless client to connect the device with 11g speed.
•11b/g/n mixed mode: Allow 11b/g/n-compliant client device to connect with the AP with
auto-negotiation speed.
SSID: SSID (Service Set Identifier) is the unique name of the wireless network.
Broadcast (SSID): Select Enable to enable the device's SSID to be visible by wireless clients.
The default is enabled.
BSSID: Basic Service Set Identifier of wireless network. In IEEE802.11, BSSID is the MAC
address of wireless access point.
Channel: Specify the effective channel (from 1 to 13\Auto) of the wireless network.
Extension Channel: To increase data throughput of wireless network, the extension channel
range is used in 11n mode.
Channel Bandwidth: Select the channel bandwidth to improve the wireless performance.
When the network has 11b/g and 11n clients, you can select the 20M; when it is an 11n
network, select 20/40M to improve its throughput.
28