133008

Pelgrim gwa 810 Manual

21
Zoom out
Zoom in
Previous page
1/23
Next page
38
39
Drill the mounting holes in the cabinets.
Filling pieces are provided in order to mount the exhaust hood
to the cabinets to a thickness of 16 mm. The supplied angle
steel (Q) can be used to fill in the space at the back between
the exhaust hood and the wall.
3.3 Mounting the exhaust hood onto the back wall
Use drilling jig N1 to determine the mounting holes. The top of the jig is equal to the top
of the exhaust hood.
Drill the holes and attach the wall brackets (R) to the wall by using plugs and screws.1.
Slide the suspension brackets into the exhaust hood from the back. 2.
Secure the bracket by using the supplied screws and locking rings. 3.
Turn a socket screw in the suspension brackets. You can use this later to determine the 4.
height.
Hang the hood onto the wall brackets. The hood is adjustable in height and depth by 5.
using the adjusting screw or by sliding the brackets further in or out.
3 Installation
Mounting preparation
Choose the exhaust outlet (B1 of B2) and open it up by removing the perforated plate.
Attach the plastic connecting piece on the opened exhaust outlet. The connecting piece
has a bayonet joint.
3.2 Mounting the exhaust hood on the side walls
Check whether the cabinets are secure. Use
drilling jig N2 to determine the mounting
holes. The top of the jig is equal to the top of
the exhaust hood. The top of the jig is at the
same level as the exhaust hood without panel
door.
3 Installation
… 21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim gwa 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim gwa 810 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info