532596
54
Zoom out
Zoom in
Previous page
1/114
Next page
ENGLISH
53
Audio and video momentarily pause dur-
ing reading of the disc.
The disc is dirty or any scratch.
Check the TV system setting, switch PAL/NT-
SC TV system in setup menu.
Try to reset the unit and press STANDBY/ON for
5 seconds, and then press this button again.
The unit is on with start logo and menu but
has no image from the disc.
The disc is dirty or any scratch.
Try to reset the unit and press STANDBY/ON,
wait for 5 seconds, and then press this button
again.
The unit freezes during reading of CD-R/
DVD-R disc.
Reset the unit. When you see Loading on the
screen, press OPEN/CLOSE to take out the
disc, clean the disc and try it again.
If the unit freezes again, the disc may have
some contents the unit can't support, please
stop playing the disc in this unit.
TV SCREEN AND VIDEO
The images from this unit do not appear
on the television. Picture is distorted.
Make sure that the television is connected to
the VIDEO OUT terminal or HDMI AV OUT ter-
minal on this unit.
Make sure that the television input setting (e.g.,
VIDEO 1) is correct.
The device is likely to enter screen saver sta-
tus.
Try to reset the unit and press STANDBY/ON for
5 seconds, and then press this button again.
Video is not output in high definition. High definition video cannot be output through
the VIDEO OUT.
Confirm that the HDMI Resolution in the Setup
menu is set properly.
The 4:3 aspect ratio picture expands left
and right.
Screen size is wrong.
Use the television to change the aspect. Refer
to the television operating instructions.
When using a component video cable, set TV
Aspect to 4:3 Pan and Scan.
There is no apparent change in picture
quality when adjusted with the Video menu
in the on-screen menu.
The eect is less perceivable with some types
of video.
When it is playing BD-LIVE disc, Video
output is a black screen.
Select ‚Erase Blue-ray storage‘ in the menu.
Close menu and restart.
Please check the internet is ok or not. Some
discs need the support of internet.
Please check the plug of the connecting cable;
if loose, insert it again.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PBR110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PBR110 in the language / languages: English, German, Dutch, Swedish as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info