532596
53
Zoom out
Zoom in
Previous page
1/114
Next page
ENGLISH
52
Troubleshooting
POWER
No power. Plug the power supply cord into an AC outlet.
Select the correct input source.
Check the connections.
The unit switches to standby mode. This is a power saving feature.
One of the unit’s safety devices is activated.
Press STANDBY/ON on the main unit to turn
the unit on.
OPERATION
The remote control doesn’t work properly. Remove obstacles between remote control
and unit.
Aim remote control at the sensor on the front
panel.
Check batteries and replace them if neces-
sary.
The unit is on but cannot be operated. Confirm the correct drive is selected.
Some operations may be prohibited by the
disc.
Reset the unit as follows:
1. Press STANDBY/ON on the main unit to
switch the unit to standby. If the unit doesn’t
switch to standby, Alternatively, disconnect
the AC power supply cord, wait one minute,
then reconnect it.
2. Press STANDBY/ON on the main unit to
switch it on. If the unit still cannot be oper-
ated, consult the dealer.
Condensation has formed: Wait 1 to 2 hours
for it to evaporate.
Play fails to start even when (PLAY) is
pressed. Play starts but then stops imme-
diately.
Insert the disc correctly with the label facing
up.
Clean or replace disc.
Shut down the unit, wait ten seconds, and re-
start the unit.
Startup is slow. When the unit is turned
on, audio and video output takes a long
time.
Startup takes time in the following situations:
Immediately after a power failure or the AC
power supply cord is connected. When the unit
is connected with an HDMI cable.
Disc tray opens automatically during read-
ing of the disc.
The disc is dirty or any scratch.
The format of the disc is not supported.
Try to reset the unit and press STANDBY/ON,
wait for 5 seconds, and then press this button
again.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PBR110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PBR110 in the language / languages: English, German, Dutch, Swedish as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info