Manual Parkside PAS 500 D3 - IAN 100052 (page 7 of 78) (English, German, Dutch, French, Swedish, Finnish)

595401

Zoom out

Zoom in

1/78

GB IE

Symbols used in the

instructions

Hazard symbols with in-

formation on prevention of

personal injury and property

damage.

Precaution symbol with information

on prevention of harm / damage.

Notice symbol with information on

how to handle the device properly.

General notes on safety

The information contained in these

operating instructions must be ob-

served. In addition, legal safety

and accident prevention regulations

must also be observed.

Caution: when using the equip-

ment, observe the following basic

safety measures in order to protect

against the risks of injury and re:

To avoid accidents and injuries

from electric shocks:

• Ensure that the power cord is not

damaged by being pulled over sharp

edges, by jamming, or by pulling on

the power cord.

• Before each use, check the power sup-

ply lead and the extension cable for

damage and ageing. Do not use the

equipment if the cable is damaged or

worn. Danger of electric shock hazard.

• If the power cord for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

• Switch the machine off and disconnect

the mains plug:

- when the machine is not in use,

- before the machine is opened up,

- for all maintenance and cleaning

work,

- if the connecting cable is damaged

or tangled up.

• Do not use the power cord to pull

the plug out of the socket. Protect the

power cord from heat, oil, and sharp

edges.

• Make sure that the mains voltage cor-

responds with the information on the

rating plate.

• Only plug the appliance into a socket

which is safeguarded by at least

13A.

• The device must be connected to a

mains socket via a residual-current

circuit breaker (RCD) with a rated leak-

age current of not more than 30mA.

• Do not expose the equipment to the

rain. Do not use the equipment in a

damp or wet environment.

• Protect yourself from electric shocks.

Avoid bodily contact with earthed

parts (e.g. pipes, radiators, electric

cookers, cooling devices).

• Use extension cables outdoors. Use

only extension cables that are ap-

proved and labelled accordingly for

outdoor use.

• Avoid accidental starting. Ensure that

the switch is off when plugging into

the socket.

To avoid accidents and injuries:

• Never leave a machine which is ready

for operation unattended at the work-

place.

• People and animals must not be vacu-

umed with the machine.

• Nozzles and suction tubes must not

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAS 500 D3 - IAN 100052 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PAS 500 D3 - IAN 100052 Manual

Product: