595401
6
Zoom out
Zoom in
Previous page
1/78
Next page
6
GB IE
A single-use thermal fuse permanently
disconnects the power circuit in event of
overheating or re inside the device.
The following describes the function of the
operating parts.
Technical data
Ash vacuum cleaner .....PAS 500 D3
Mains voltage ........... 230-240 V~, 50 Hz
Rated power input
(Power consumption) .................... 500 W
Power cord length ......................... 2.5 m
Safety class ...................................... II
Protection category.......................... IP20
Suction force ......... 12.5 kPA, (125 mbar)
Metal container
capacity, gross ........18 l
Length of the metal
s
uction hose
...................approx. 120 cm
Suction tube
Length ..........................approx. 30 cm
Diameter ...................... approx. 40 mm
Weight (incl. all
accessories) ..................... approx. 4.0 kg
Technical and visual modications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.
Safety information
Device symbols
Warning!
Read carefully before use.
Retain for reference.
Do not expose the unit to rain.
For cold ashes only*!
Matter exceeding a temperature
of 40°C (104°F) poses a re risk!
* “Cold ashes” are ashes that have cooled for
a sufcient time and no longer contain pockets
of embers. This can be determined by sifting
through the ashes with a metal implement before
using the equipment. The cold ashes emit no fur-
ther perceptible heat radiation.
1 Do not vacuum up soot or combusti-
ble materials.
During vacuuming, constantly check
the hoses and vacuum for heating.
The vacuumed material must not
exceed a temperature of 40°C
(104°F).
2 - 4 Open, empty and clean the vacuum
outdoors before and after vacuum-
ing.
Electrical machines do not belong
with domestic waste.
Safety class II
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PAS 500 D3 - IAN 100052 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PAS 500 D3 - IAN 100052 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info