683959
1
Zoom out
Zoom in
Previous page
1/2
Next page
Protection degree
Working temperature 0ºC ~ +45ºC
Dimensions 78 x 28 x 23mm
Radio-Frequency
Codified transmission in 868,3MHz
Range: 100m (in the free field)
Compatible with KNX-RF:
CH_Generic_Switch_5 (0311h)
CH_Battery_Status (0021h)
GB
WIRELESS TRANSMITTER PUSHBUTTON
TECHNICAL DATA
DESCRIPTION
RF-KNX compatible Pushbutton transmitter which emulates the working mode of the
channel code 0311h.
The commissioning of the sender is carried out via a small pushbutton located inside the
device (A).
The mode selector switch (B) has 2 functions:
· If the pushbutton is being linked with other KNX actuators it is used to choose the working
mode.
· In normal operation it is used to define the working mode.
Avoid installing the transmitter close to radioelectric devices, microwaves,...
A minimum distance of 2m must be kept between the transmitter and the receiver.
WORKING MODES
Through the mode selector switches it is possible to select different operation modes:
Switch ON-OFF, Dimmer, Blinds control or Scene selector.
1.- Switch ON-OFF
Every time the pushbutton is pressed it will send a telegram type ‘SwitchOnOff’.
The telegram can be ON or OFF.
Depending on the position of the mode selector switches it can be:
· POS 1 or 4: ‘Toggle Switch’ mode. Every time that the pushbutton is pressed the value
which is sent changes between ON and OFF.
· POS 2: ‘ON’ mode. ON telegram is always sent.
· POS 3: ‘OFF’ mode. OFF telegram is always sent.
2.- Dimmer
Every time the pushbutton is pressed it will send a telegram type ‘Dimming_Ctrl’.
The telegram can be ON, OFF, Dimming_Up or Dimming_Down.
Depending on the position of the mode selector switches it can be:
A - Brief press:
· POS 1 or 4: ‘Toggle Switch’ mode. Every time that the pushbutton is pressed the value
which is sent changes between ON and OFF.
· POS 2: ‘ON’ mode. ON telegram is always sent.
· POS 3: ‘OFF’ mode. OFF telegram is always sent.
B - Sustained press (1 second):
· POS 1 or 4: ‘Toggle Dim’ mode. Every time that the pushbutton is pressed the value
which is sent changes between Dimming_Up and Dimming_Down.
· POS 2: ‘Dimming_Up’ mode. Dimming_Up telegram is always sent.
· POS 3: ‘Dimming_Down’ mode. Dimming_Down telegram is always sent.
Note: In the case of sustained press, the dimming finishes as soon as the pushbutton is
released.
3.- Blinds Switch
Every time the pushbutton is pressed it will send a telegram type ‘StepStop_UpDown’ or
‘Move_UpDown’.
The telegram can be Step_Up, Step_Down, Move_Up or Move_Down.
Depending on the position of the mode selector switches it can be:
A - Brief press:
· POS 1 or 4: ‘Toggle Step’ mode. Every time that the pushbutton is pressed the value
which is sent changes between Step_Up and Step_Down.
· POS 2: ‘Step_Down’ mode. Step_Down telegram is always sent.
· POS 3: ‘Step_Up’ mode. Step_Up telegram is always sent.
B - Sustained press (1 second):
· POS 1 or 4: ‘Toggle Move’ mode. Every time that the pushbutton is pressed the value
which is sent changes between Move_Up and Move_Down.
· POS 2: ‘Move_Down’ mode. Move_Down telegram is always sent.
· POS 3: ‘Move_Up’ mode. Move_Up telegram is always sent.
Battery life (estimated) >8 years
Power supply 2 batteries 3V CR2050 (included)
DE
676 010 rf
PULL THE PLASTIC FOIL OUT TO ACTIVATE THE BATTERY
IP44Schutzart
Betriebstemperatur 0ºC ~ +45ºC
Abmessungen 78 x 28 x 23mm
Funkfrequenz
Verschlüsselte Übertragung, 868,3MHz
Reichweite: 100m (auf freiem Feld)
Kompatibel mit KNX-RF:
CH_Generic_Switch_5 (0311h)
CH_Battery_Status (0021h)
FUNKTASTER 1-Kanal
TECHNISCHE DATEN
BESCHREIBUNG
Bei diesem Gerät handelt es sich um einen KNX-RF kompatiblen Funktaster. Emulation des
„Channel code 0311h“.
Die Konfiguration des Senders wird über einen kleinen Taster im Inneren des Gerätes
durchgeführt (A).
Der Modus-Wahlschalter (B) hat zwei Funktionen:
· Während der Verlinkung zur Auswahl des Betriebsmodus.
· Im Normalbetrieb zur Auswahl der Funktionsweise (siehe Erläuterungen der
Betriebsarten unten).
Die Verwendung des Sensors in der Nähe von funkbasierten Geräten oder Mikrowellen und
dergleichen ist nicht erlaubt. Der Abstand zwischen Sensor (Sender) und Empfänger sollte
mindestens 2m betragen.
BETRIEBSMODI
Über den Betriebsmodus-Schalter können verschiedene Betriebsmodi eingestellt werden:
Schalter EIN-AUS, Dimmer, Rollladensteuerung, Szenenwahl.
1.- Schalter EIN-AUS
Bei Tastendruck wird der Nachrichtentyp 'SwitchOnOff' gesendet.
Das gesendete Telegramm ist EIN oder AUS und abhängig von der Position des
Modus-Wahlschalters:
· POS 1 oder 4: „Umschalten“. Jedes Mal, wenn der Taster gedrückt wird, wechselt der
gesendete Wert zwischen „EIN“ und „AUS“.
· POS 2: „EIN“ Modus. Mit jedem Tastendruck wird ein „EIN“ gesendet.
· POS 3: „AUS“Modus. Mit jedem Tastendruck wird ein „AUS“ gesendet.
2.- Dimmer
Bei Tastendruck wird der Nachrichtentyp „Dimming Ctrl“ gesendet. Die gesendete Nachricht
kann EIN, AUS, Dimmen heller oder Dimmen dunkler sein. Abhängig von der Position des
Betriebsmodus-Schalters und der Länge des Tastendrucks ergeben sich folgende
Möglichkeiten:
A – Kurzer Tastendruck:
· POS 1 oder 4: „Umschalt-Modus“. Bei Tastendruck wechselt der gesendete Wert jeweils
zwischen „EIN“ und „AUS“.
· POS 2: ‘EIN’ Modus. Es wird immer jeweils ein „EIN“ gesendet.
· POS 3: ‘AUS’ Modus. Es wird immer jeweils ein „AUS“ gesendet.
B – Langer Tastendruck (>1 Sekunde):
· POS 1 oder 4: „Umschalt-Modus“. Bei Tastendruck wechselt der gesendete Wert
zwischen „Dimming up“ und „Dimming down“.
· POS 2: ‘EIN’ Modus. Es wird immer ein „Dimming up“ gesendet.
· POS 3: ‘AUS’ Modus. Es wird immer ein „Dimming down“.gesendet.
Anmerkung: Bei langem Tastendruck wird das Dimmen mit loslassen der Taste beendet.
3.- Rollladensteuerung
Bei Tastendruck wird der Nachrichtentyp “StepStop_UpDown” oder “Move UpDown”
gesendet.
Die gesendete Nachricht kann “Step_Up”, “Step_Down”, “Move_Up” oder “Move_Down”.-
sein. Abhängig von der Position des Betriebsmodus-Schalter und der Länge des
Tastendrucks ergeben sich folgende Möglichkeiten:
A – Kurzer Tastendruck:
· POS 1 oder 4: „Umschalt-Modus“. Bei Tastendruck wechselt der gesendete Wert
zwischen “Step_Up”, und “Step_Down”.
· POS 2: „Down“ Modus. Es wird immer ein “Step_Down”.gesendet.
· POS 3: „UP“ Modus. Es wird immer ein “Step_Up”, gesendet.
B – Langer Tastendruck (>1 Sekunde):
· POS 1 oder 4: „Umschalt-Modus“. Bei Tastendruck wechselt der gesendete Wert
zwischen „Move_Up“ und „Move_Down“.
• POS 2: „Down“ Modus. Es wird immer ein „Move_Down“. gesendet.
• POS 3: „UP“ Modus. Es wird immer ein „Move_Up“.gesendet.
Lebensdauer > 8 Jahre
Stromversorgung 2 Batterien 3V CR2025 (enthalten)
BITTE VOR BENUTZUNG DIE FOLIE AN DER BATTERIE ENFERNEN
IP44
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paladin 676 010 rf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paladin 676 010 rf in the language / languages: English, German as an attachment in your email.

The manual is 7,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info