683968
1
Zoom out
Zoom in
Previous page
1/2
Next page
GB
Gruppenadressen TP Anzahl max. 250
Verlinkungen ETS Version ETS3 oder höher
Funkfrequenz
Verschlüsselte Übertragung, 868,4MHz
Reichweite: 100 m (auf freiem Feld)
Kompatibel mit
Abmessungen 38 x 42 x 15 mm
Betriebstemperatur -5ºC ~ +45ºC
Lagertemperatur -20ºC ~ +70ºC
Schutzart IP20 (EN60529)
Montage Unterputzdose
Schutzklasse III
Anzahl Telegramm- Wiederholungen 2-fach
Funkprodukte paladin KNX-RF kompatibel
DE
SIGNALKOPPLER FUNK zu KNX-TP 16-KANAL
TECHNISCHE DATEN
BESCHREIBUNG
Es handelt sich bei diesem Gerät um einen RF-(KNX) kompatiblen Signalkoppler /
Linienkoppler zur Anbindung von funkbasierten RF-(KNX) kompatiblen Produkten an
KNX-TP basierte Installationen.
Der Signalkoppler ist verwendbar mit unseren KNX-RF kompatiblen Produkten wie z.B.
Licht-, Heizungs- / Klimasteuerung, Jalousiesteuerung, usw. Es stehen bis zu 16
unabhängige RF / TP Kanäle zur Verfügung.
Zur Konfiguration wird die ETS3 oder höher benötigt.
SYMBOLERKLÄRUNG / FUNKTION (Zeichnung siehe oben)
· A: KNX-TP Bus-Klemme
· B (TP prog): Grün/rote LED-Taste zur Konfiguration über ETS.
· C: RF Betriebsart-Wahlschalter:
· P: Einlernvorgang / Programmiermodus (Empfänger oder Sender)
· R: Normalbetrieb mit zusätzlicher Verstärker-Funktion (Repeater-Funktion)
· S: Normalbetrieb ohne Verstärker-Funktion
· E: Löschen einer einzelnen Verlinkung.
· EA: Löschen aller Verlinkungen.
· D: Kanal-Wahlschalter (bis zu 16 Kanäle: 0, 1, 2, 3, 4, ...F).
· E (RF prog): Grün/rote LED-Taste zum Verlinken von RF-(KNX) kompatiblen paladin
Geräten.
INSTALLATION / INBETRIEBNAHME
SICHERHEITSHINWEIS:
Elektrische Installationen müssen durch Fachpersonal durchgeführt werden.
Der Signalkoppler hat einen Standard-Busanschluss für den Anschluss an den KNX-TP Bus.
Die Funktionsweise des Gerätes ist abhängig von der festgelegten Konfiguration in ETS3
(oder höher). Die ETS Applikation kann über unsere Webseite heruntergeladen werden.
a) TP Inbetriebnahme
Installation und Inbetriebnahme des Gerätes:
1. Verbinden Sie den Signalkoppler mit dem KNX-TP Bus (Busklemme).
2. Vergeben Sie innerhalb der ETS eine physikalische Adresse für das Gerät und stellen die
weiteren Parameter ein.
3. Drücken Sie kurz auf die Programmiertaste (B). Das Gerät ist nun Programmierbereit
über ETS. Die LED (B) des Tasters beginnt dauerhaft grün zu leuchten. Nach erfolgter
Programmierung leuchtet die LED (B) rot bis zum Abschluss der Programmierung.
Anschließend geht die LED wieder aus.
TP Anzahl max. 250
Anzahl Kanäle 16
Busanschluss KNX-Busklemme
Leistungsaufnahme < 10mA
Stromversorgung 21 – 32V
DC über KNX-Bus
673 520 rf
A
C
D
B
E
Kommunikation Bidirektional
Zertifizierung EIB / KNX
Gemäß den Standards EN50090-2-2, EN50428 & EN50491
TP max. number of links 250
ETS Version ETS3 or higher
Frequency
Codified transmission in 868,4MHz with
a coverage of 100m (in the free field)
Compatible with
Dimensions 38 x 42 x 15 mm
Working temperature -5ºC ~ +45ºC
Storage temperature -20ºC ~ +70ºC
Protection degree IP20 (EN60529)
Mounting Flush-mounting
Protection class III
RF telegram repetition 2 times
Wireless paladin KNX-RF compatible products
KNX-RF / KNX-TP MEDIA COUPLER
TECHNICAL DATA
DESCRIPTION
KNX-RF compatible to KNX-TP media coupler. Bidirectional gateway between
radio-frequency devices and KNX-TP bus. It allows transmission of telegrams from RF
devices to KNX-TP communication bus and vice versa.
Can be used with our RF compatible devices for lighting control, HVAC, blinds/shutters
control and general purpose devices.
This device offers 16 RF / TP independent channels.
For configuration ETS3 or higher is required.
This device consists of (see image at top of page):
· A: KNX-TP connection terminal
· B (TP prog): green/red LED-key for commissioning via ETS.
· C: RF working mode selector switch:
· P: Link programming
· R: Operation mode + repeater function
· S: Operation mode
· E: Erase one link.
· EA: Erase All links.
· D: Channel selector (up to 16 channels: 0, 1, 2, 3, 4, ...F).
· E (RF prog): green/red LED-key to link RF-compatible paladin devices.
INSTALLATION / COMMISSIONING
SAFETY INSTRUCTIONS:
The electrical installation must be carried out by qualified personnel.
The media coupler has a standard terminal (A) for the connection to the KNX-TP bus.
The operation of the product is depending on the configuration done using ETS3 or higher.
You can download the application software from our website.
a) TP Commissioning
For installation and commissioning of the device, follow these steps:
1. Connect the media coupler to the KNX Bus.
2. Assign a physical address and assign parameters to the application program.
3. Press the programming key (B) briefly. The green LED will permanently light up and the
device will be ready to be programmed by ETS. After the programming (30sec) the LED
will flicker in red.
4. Once programmed, the LED will be off.
TP max. number of group addresses 250
Number of channels 16 Channels
Bus connection KNX connecting terminal
Consumption < 10mA
Power supply 21 – 32V
DC (via KNX-Bus)
Communication Bidirectional
Certificate EIB / KNX
According to the Standards EN50090-2-2, EN50428 & EN50491
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paladin 673 520 rf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paladin 673 520 rf in the language / languages: English, German as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info