Page 17 of 18
Note: Before switching on, make sure you have free sight to
the satellite (in a northerly direction).
12. Operation of the OYSTER DIGITAL
1. Switch on the TV set. Switch to SCART or the matching TV
channel if necessary.
2. Power up the Oyster with the red button on the remote.
Alternatively you can push both buttons on the sat-mouse
simultaneously for a short moment to get the system up.
Everything else will go on automatically from now on, until
you will see a picture on your screen.
The Oyster will typically move to the position where a signal has
been received from last time. If no signal can be found there, it
will jump to a fully automatic search immediately.
While the antenna is moving you will see moving dashes on your
sat-mouse. It will typically take no longer than 60 seconds to lock
onto a satellite signal, but you should allow up to 10 minutes for
a freshly-fitted system.
