Manual Oregon 511A (page 16 of 19) (English)

640534

Zoom out

Zoom in

1/19

3. Setting The Chain Stop. Position the cut-

ter’s depth gauge so that it is centered

under the grinding wheel (see Figure 31).

Use chain-stop adjusting knob to obtain

this setting (see Figure 32).

4. Setting the Depth Gauge. Place an ORE-

GON

Gaugit (depth gauge setting tool) on

the chain in vise over the depth gauge por-

tion of the cutter (see Figure 33).

Note: Gaugit not included. See

page 15 to locate the correct depth gauge

tool for chain type.

5. With an OREGON

flat file

(P/N 12211), file the first depth gauge.

Note: OREGON® flat file P/N 12211

not included.

Remove the gaugit and lower the grinding

wheel so that it touches the portion of the

depth gauge that has just been hand filed.

Set the depth adjustment knob and lock

into place. This has just set the depth of

grind surface for the rest of the depth

gauges.

6. Grind all depth gauges.

OPERATING INSTRUCTIONS

Figure 33

Figure 34

Figure 32

Figure 31

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oregon 511A in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oregon 511A Manual

Product: