492711
7
Zoom out
Zoom in
Previous page
1/7
Next page
7
If you experience a problem with your
projector, please refer to the following
information. If a problem persists, please
contact your local reseller or service
center.
Image Problems
No image appears on-screen
Ensure the cables/charger/
battery are correctly and securely
connected.
Ensure the pins of connectors are
not crooked or broken.
Make sure the projector is
switched on.
Image is out of focus
Adjust the Focus Dial.
Make sure the projection screen
is between the required distance
9.6 to 126.6 inches (0.245 to 3.215
meters) from the projector. See
page 5.
Image is too small or too large
Move the projector closer to or
further from the screen.
Image is reversed
Select “Source --> Settings -->
System Setup --> Projection” from
the OSD and adjust the projection
direction.
TROUBLESHOOTING
Audio Problems
No sound
Press the VO
LUME + button. (See
page 3.)
Battery Problems
Battery capacity is low
Remove the battery and clean the
connectors.
The battery is worn out and needs
to be replaced. See page 3.
The battery may not charge right
after the projector is turned off due
to the high temperature emitted by
the projector.
Message
LED
Operation
Battery Charging
Charge Complete
LED Indicator
:Off / :Green / :Red
Message Reminders
Out of the range
High battery consumption
Please charge the battery.
(See page 3)
COMPATIBILITY MODE
Timing Table
Mode Resolution
V-Sync
(Hz)
VGA
640x480 60
800x600 60
1024x768 60
1280x720 60
1280x800 60
Composite
Component
HDMI
480i / 480P 60
576i / 576P 50
720P 50 / 60
1080i 50 / 60
or
HOW TO USE THE MENU - SOURCE: COMPOSITE AV, VGA, COMPONENT, AND HDMI
Input signal source
F
Bright mode: Full LED power.
STD mode: Standard LED power.
F
Front Desktop.
F
Rear Desktop.
F
Front Inverted.
F
Rear Inverted.
4x3 aspect ratio.
16x9 aspect ratio.
Auto aspect ratio.
Contrast: adjust contrast
H. Position: adjust the horizontal
position.
V. Position: adjust the vertical
position.
Phase: change the display data
frequency to match the frequency
of your computer’s graphic card.
Use this function only if the image
appears to flicker vertically.
Frequency: synchronize the signal
timing of the display with the
graphic card. If the image appears
to be unstable or flickers, use this
function to correct it.
Composite, HDMI or
Component source
VGA source
F
<Note>
Only for VGA input source.
Multimedia Format: Video
File
Format
Video
Format
Max Res. Profile
AVI,
MOV,
MP4,
3GP
H.264
720X480 30fps
or
720x576 25fps
Baseline
AVI
MPEG4
Simple
Profile
AVI
Xvid Baseline
AVI
MJPEG 640X480 30fps Baseline
<Note>
1. Video format does not support content
with B-Frame function.
2. Please use Arcsoft MediaConverter to
convert video and PowerPoint files.
Multimedia Format: Photo
File Format File Extension
JPG
JPEG
*.jpg, *.jpeg
Multimedia Format: Audio
File Format
AAC, MP3, PCM, ADPCM, WMA, OGG
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma PK201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma PK201 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info