492711
4
Zoom out
Zoom in
Previous page
1/7
Next page
4
2
1
1. Remove protection cap and insert
the plug. (
1
~
2
)
2. Connect the charger. (
3
~
4
)
3. During charging the LED indicator
lights red. (
5
)
Projector will not charge while
operating.
4.
The LED Charge Indicator will go off
when battery is fully charged. This
process may take up to 2.5 hours
4
5
CHARGING THE BATTERY
3
1
2
CONNECT INPUT SOURCE - (VIDEO IN)
1
2
1
2
or
or
1. Connect the AV input source.
(
1
~
2
)
2. After powering on projector, press
"Auto Search Source Button" to
change sources.
3. Connect external speakers to the
audio out connector of the projector.
(
3
)
<Note>
1. All other brand and product names are
trademarks or registered trademarks of their
respective companies.
2. The connecting cable of video output
device is not supplied, please contact their
service center.
3. iPod nano/iPod touch/iPhone/iPod classic
(version 5 and above)
4. Designed for iPod/iPhone/Mobile phone/
PMP with TV out functions. Using with
device with audio signal voltage > 0.3Vrms
is not recommended.
CONNECT INPUT SOURCE -
(VGA/USB/HDMI/COMPONENT IN)
1
2
1
2
MOLEX
1
2
1
2
or
1. Connect the VGA/Component
source device with the Universal
I/O connector. (
1
~
2
)
2. After powering on projector, press
"Auto Search Source Button"
to change sources.
Insert universal connector
with arrow mark facing up.
<Note>
1. For more LED indicator, see page 7.
2. After the projector is turned off, the
battery may not start charging right away
due to over temperature protection.
CONNECT INPUT SOURCE DATA TRANSFER
<Note>
1. USB device: Support USB Flash Drive
up to 5V/150mA, but does not support USB
Hard Disk Drive
2. Female USB cable, Component cable,
and HDMI cable are optional accessories.
<Note> The laptop/PC can only detect
the input source when the Projector is
switched on. The projection will stop when this
connection is made.
1. Connect laptop or PC for data
transfer to the Projector internal
memory or additional MicroSD
memory using the supplied Male
USB Cable. When connected,
switch the Projector on.
<Optional>
The PK201 can also be charged via USB to
DC cable (
6
)
M
O
L
E
X
M
O
L
E
X
1
2
or
I
NSERT MICROSD CARD
1. Insert a MicroSD card into the
slot with the gold contacts facing
down.
3
or
1. Connect the HDMI source device
to the mini HDMI connector.
2. After powering on projector, press
"Auto Search Source Button"
to change sources.
or
1. Connect the USB flash drive to
the micro USB port using the
female USB cable.
2. Select USB Flash Drive from
the Main Menu.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Optoma PK201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Optoma PK201 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info