608263
14
Zoom out
Zoom in
Previous page
1/16
Next page
14
Cassette deck main-
tenance
This deck requires no lubrication.
Head, Pinch Roller and Capstan Cleaning
Playback sound quality can be greatly diminished if magnetic
particles are allowed to accumulate on the recording/playback
head or playback head. Be sure to clean the head periodically,
normally 2 - 3 times a month, to maintain your deck’s original
performance. Dirty heads may cause:
Poor sound quality (lose of high frequency response)
Decreased volume
Skipping
Incomplete erasure of previous recordings
If the pinch rollers and capstan are dirty, the tape may become
tangled and damaged by wrapping around the pinch roller and
capstan.
To prevent these problems, clean the heads, pinch rollers and
capstans with a cotton swab dipped in cleaning fluid.
Demagnetizing
Residual magnetism builds up in the heads after the cassette deck
has been used for an extended period of time. This buildup
introduces noise and static into tapes and impairs high frequency
response. To prevent this, demagnetize the heads with any
commercially available head eraser once every 50 hours of use.
Refer to the instruction manual of the head eraser for detailed
instructions.
Specifications
Track Format: 4-track, 2-channels
Erasure System: AC erase
Tape Speed: 4.8 cm/sec. (1-7/8 i.p.s.)
9.6 cm/sec. (3-3/4 i.p.s.) (high-speed
dubbing)
Wow and Flutter: 0.08 % (WRMS)
Frequency Response: 20 — 15,000 Hz (Normal)
(30 — 14,000 Hz ± 3 dB)
20 — 16,000 Hz (High)
(30 — 15,000 Hz ± 0 dB)
20 — 17,000 Hz (Metal)
(30 — 16,000 Hz ± 0 dB)
S/N Ratio: Dolby NR off: 58 dB (metal position
tape)
A noise reduction of 10 dB above
5 kHz and 5 dB at 1 kHz is possible
with Dolby B NR.
A noise reduction of 20 dB at 5 kHz
is possible with Dolby C NR.
Input Jacks: Line IN: 2
Input sensitivity: 80 mV
Input impedance: 50 kohms
Outputs: Line OUT: 2
Standard output level: 500 mV
(0 dB)
Optimum load impedance: over
50 kohms
Motors: DC servo motor × 2
Heads: REC/PB: 1
PB: 1
ERASE: 1
Power Supply: TA-RW144:
AC 120 V, 60 Hz
TA-RW244:
AC 230 V, 50 Hz
AC 120 V and 220-230 V,
Switchable 50/60 Hz
(Worldwide model)
Power Consumption: 17 watts
Dimensions: 455(W) × 120(H) × 305(D) mm
(17-15/16" × 4-3/4" × 12")
Weight: 5.2 kg. (11.5 lbs.)
Specifications and external appearance are subject to change
without notice because of product improvements.
Pinch rollers
Erase head
(DECK B only)
REC/PB head
Capstans
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TA-RW244 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TA-RW244 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info