122530

One for All urc 7040 signaturl Manual

6
Zoom out
Zoom in
Previous page
1/24
Next page
6 WWW.ONEFORALL.COM
Setting Up Your Devices
Example: To set up the ONE FOR ALL 4 for your television:
1 Make sure your device (television) you wish to ope-
rate is switched on (not in standby).
2 Find the code for your device in the Code List (page
80 - 89). The device codes are listed per device type and
brand name. Also the most popular code for each brand is
listed first.
3 Press the device mode key (TV) on the ONE FOR ALL 4
remote for the device you wish to set up.
4 Press and hold down MAGIC until the red light blinks
twice (the red light will blink once then twice).
5 Enter your four-digit device code using the number
keys. The red light will blink twice.
6 Now aim the ONE FOR ALL 4 remote at your device
(television) and press POWER. If your device switched
off, the ONE FOR ALL 4 is ready to operate your device.
7 Turn your device (television) back on and try all the remo-
te’s functions to ensure they are working properly. If the
functions do not work properly, repeat steps 1-6 using
another code listed under your brand.
8 If your device (television) does not respond to the
code entered, follow steps 1-6 with each code listed
for your brand. If none of the codes listed for your
brand operate your device (television), or if your
brand is not listed at all, try the search method
described on page 7.
9 Write your devicecode in the applicable four digit
boxes provided in the battery compartment and on
page 8 for future reference.
Installation
Before you start, please read these instructions carefully
Important notes:
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- For VCR setup: If your VCR’s original remote control does not have a
POWER key, press PLAY instead of POWER during step 6.
- Remember to press the correct device mode key before operating your
device. Only one device can be assigned to each device mode key. If your
original remote control operates more than one device, you need to set up
each device separately.
ONE FOR A
Acura
Admiral
Adyson
Agazi
AGB
Agef
Aiko
0
0
0
9
0
0
8
7
, 0
0
9
3
, 0
3
6
3
, 0
4
1
0
2
1
7
, 0
2
1
6
0
2
6
4
0
5
1
6
0
0
8
7
0
2
1
6
, 0
0
0
9
, 0
0
3
7
, 0
0
0
3
7
, 0
2
7
4
0
3
6
1
, 0
2
0
8
, 0
3
7
1
____
6 WWW.ONEFORALL.COM
To set up for a second TV, VCR, DVD or SAT (See Changing the Mode
of a Device Key, Page 9).
Devices can be found under the following keys:
Television DVD Player
Video Recorder
Satellite Receiver /
Cable Converter
TV
VCR
TV
DVD
SAT
M
A
G
IC
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All urc 7040 signaturl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All urc 7040 signaturl in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info