Manual One for All URC 5800 Cinema 5 (page 10 of 12) (English)

492774

Zoom out

Zoom in

1/12

Setup Codes For MiniDisc

Denon 0873

JVC 0826, 0681

Onkyo 0868

Sharp 0861

Sony 0490

Setup Codes For Video Accessories

Archer 0160

GC Electronics 0160

Jebsee 0160

Magnavox Web-TV

0818

Philips Web TV 0818

RadioShack 0160

TeleCaption 0171

Sony Web-TV 0850

Setup Codes For Miscellaneous Audio

Aiwa 0010, 0159, 0404

Fisher 0052

Harman/Kardon 0477

Jerrold 0459, 0520

JVC 0073

Nikko 0376

RCA 0056

Scientific Atlanta 0460

Sony 0010, 0159

Starcom 0459

RE-ASSIGNING DEVICE KEYS

You can use the Cinema 5 to operate a second TV or a sec-

ond VCR or any combination of seven home entertainment

components. For example, you may want your Cinema 5 to

control 1 TV, 1 Cable Converter, 1 Receiver, 1 CD Player, 1

DVD Player and 2 VCRs. To accomplish this, you must re-

assign one of the device keys to operate the desired compo-

nent, in this case, a second VCR. The chart below shows

you how to re-assign a particular device key and then set up

your new component.

TV to VCRSETUP* - 992 - VCR - TV - TV - SETUP*

- VCR code

TV to DVD/LD SETUP* - 992 - DVD/LD - TV - TV -

SETUP* - DVD or LD Player code

TV to RCVR SETUP* - 992 - RCVR - TV - TV -

SETUP* - Audio code

TV to CBL/SAT SETUP* - 992 - CBL/SAT - TV - TV -

SETUP* - Cable/DBS code

VCR to TVSETUP* - 992 - TV - VCR - VCR -

SETUP* - TV code

VCR to DVD/LD SETUP* - 992 - DVD/LD - VCR - VCR -

SETUP* - DVD/LD Player code

VCR to RCVR SETUP* - 992 - RCVR - VCR - VCR -

SETUP* - Audio code

VCR to CBL/SAT SETUP* - 992 - CBL/SAT - VCR - VCR -

SETUP* - Cable/DBS code

DVD/LD to TV SETUP* - 992 - TV - DVD/LD - DVD/LD -

SETUP* - TV code

DVD/LD to VCR SETUP* - 992 - VCR - DVD/LD - DVD/LD

- SETUP* - VCR code

DVD/LD to RCVR SETUP* - 992 - RCVR - DVD/LD -

DVD/LD - SETUP* - Audio code

DVD/LD to CBL/SAT

SETUP* - 992 - CBL/SAT - DVD/LD -

DVD/LD - SETUP* - Cable/DBS code

RCVR to TV SETUP* - 992 - TV - RCVR - RCVR -

SETUP* - TV code

RCVR to VCR SETUP* - 992 - VCR - RCVR - RCVR -

SETUP* - VCR code

RCVR to DVD/LD SETUP* - 992 - DVD/LD - RCVR - RCVR -

SETUP*- DVD/LD Player code

RCVR to CBL/SAT

SETUP* - 992 - CBL/SAT - RCVR -

RCVR - SETUP* - Cable/DBS code

CBL/SAT to TV SETUP* - 992 - TV - CBL/SAT -

CBL/SAT - SETUP* - TV code

CBL/SAT to VCR SETUP* - 992 - VCR - CBL/SAT -

CBL/SAT - SETUP* - VCR code

CBL/SAT to DVD/LD

SETUP* - 992 - DVD/LD - CBL/SAT -

CBL/SAT - SETUP* - DVD or LD code

CBL/SAT to RCVR

SETUP* - 992 - RCVR - CBL/SAT -

CBL/SAT - SETUP* - Audio code

*NOTE: Here (*) you must hold SETUP until the Cinema 5’s

red light blinks twice.

PROGRAMMING THE MACRO KEYS

The Cinema 5 has two Macro keys (MACRO and MACRO2)

that allow the user to play back a series of keystrokes, at any

time, with the press of one key. For example, to set up a

sequence that will turn on your components and change the

components to the proper inputs:

1. Press and hold SETUP until the Cinema 5’s red

light blinks twice, then release SETUP.

2. Press 9 - 9 - 5. The Cinema 5’s red light will blink

twice.

3. Press and release one of the MACRO keys. This

will be the key that will play back the series of key-

strokes assigned to that key.

4. Begin entering the sequence of keystrokes, up to

15, that you wish to be played back when you

press the MACRO key. For example:

RCVR – POWER – TV – POWER – TV/VCR (To

change the input on the TV to VIDEO 1) –

CBL/SAT – POWER.

5. Once your sequence is entered, press and hold

SETUP until the Cinema 5’s red light blinks twice.

Now, using the example as above, whenever the pro-

grammed MACRO key is pressed, the Receiver would power

ON, the TV will power ON and change the input to VIDEO 1

and then the Satellite would power ON.

Repeat steps 1 - 5 to then setup a second sequence on the

MACRO2 key.

VOLUME LOCK

Volume Lock allows the user to designate which component

will control the volume in the TV, DVD/LD and CBL/SAT

modes. To set the Volume Lock to the TV mode:

1. Press and hold SETUP until the Cinema 7’s red

light blinks twice, then release SETUP.

2. Press 9 - 9 - 3. The Cinema 5’s red light will blink

twice.

3. Press and release TV. The Cinema 5’s red light

will blink twice.

Now, whenever you press VOL , VOL or MUTE in the

VCR, DVD/LD and CBL/SAT modes your TV will control the

▲

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 5800 Cinema 5 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC 5800 Cinema 5 Manual

Product: