Manual One for All URC 4110 (page 4 of 10) (English)

492797

Zoom out

Zoom in

1/10

4. Aim the remote control at the device and press POWER once.

The device should turn off. If it does not respond, repeat

steps 2-3, trying each code for your brand until you find one

that works. If it still does not work,try

Searching For Your

Code

NOTE: If the device does not have a POWER key, press the (PLAY) key.

5. Repeat steps 1 through 4 for each device you want to control.

PROGRAMMING TV/VCR COMBO CONTROL

Perform the following instructions to control a TV/VCR Combo:

1. Turn on the TV/VCR Combo and insert a video cassette.

NOTE: Please read steps 2-4 completely before proceeding. Highlight or write

down the codes and device you wish to program before moving on to step 2.

2. On the remote control, press VCR.Press and hold SET until the

LED blinks twice, then release

SET.

3. Use the

Setup Codes For TV/VCR Combos

(on page 13) to locate the

brand name and then enter the first four-digit code for your device.

If performed correctly,the LED will blink twice.

NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try

entering the same code again.

4. Aim the remote control at the device and press POWER once.

It should turn off.If the device does not respond,repeat

steps 2-3, trying each code for your brand until you find one

that works. If it still does not work,try

Searching For Your

Code

NOTE: If the device does not have a POWER key, press the (PLAY) key.

PROGRAMMING TV/DVD COMBO CONTROL

Perform the following instructions to control a TV/DVD Combo:

1. Turn on your TV/DVD and insert a disc.

2. On the remote control,press

DVD.Press and hold SET until

the LED blinks twice, then release SET.

3. Use the

Setup Codes For TV/DVD Combos

(on page 15) to locate the

brand name and then enter the first four-digit code for your device.

If performed correctly,the LED will blink twice.

4. Aim the remote control at your TV/DVD and press

POWER.

Your TV/DVD should turn off. If your original TV/DVD

remote control did not have a POWER key,press

PLAY.Your

TV/DVD should start to play.If your TV/DVD does not

respond, repeat steps 2-4, trying each code listed for your

brand until you find the one that operates your TV/DVD.

5. Your One For All 4 Devices is now programmed to operate your

TV/DVD.Write your TV/DVD code for future reference.

Remember, if you want to use your One For All 4 Devices to operate

your TV/DVD,press the DVD key first.

INSTALLING BATTERIES

1. On the remote control’s back, push the tab and lift off the battery

cover.

2. Obtain two (2) new AAA alkaline batteries.Match the + and –

marks on the batteries to the + and – marks in the battery case,

then insert the new batteries.

3. Press the battery cover back into place. The tab should click when

the cover is locked.

4. Test the unit by pressing

POWER and any mode key (e.g.,TV). If the

batteries are inserted correctly, the LED will blink once.

NOTE: When batteries need replacement, the remote control will stop operat-

ing. Remove the old batteries and insert new ones within 30 minutes to ensure

all of your programming information is restored.

SETTING UP YOUR COMPONENTS

The One For All 4 Devices remote control is preprogrammed at the fac-

tory to operate an RCA TV and VCR, a Motorola (GI) cable box, and a

Toshiba DVD player.To control devices other than the default brands,

perform the following steps; otherwise skip this section:

NOTE: For TV/VCR Combo control, see the next section.

1. Turn on a device (e.g.,VCR) and, if applicable, insert media, (e.g.,

cassette or disc).

NOTE: Please read steps 2-4 completely before proceeding. Highlight or write

down the codes and device you wish to program before moving on to step 2.

2. On the remote control,press a device key once (i.e., VCR, DVD,

TV,or CBL/SAT ). Press and hold SET until the LED blinks twice,

then release

SET.

3. Use the

Manufacturer’s Codes

(starting on page 12) to locate the

type of device and brand name and then enter the first four-digit

code for your component. If performed correctly, the LED will blink

twice.

NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try

entering the same code again.

CTGRD4N 4110 manual booklet.QXD 5/2/06 3:09 PM Page 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 4110 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC 4110 Manual

Product: