2422
4
Zoom out
Zoom in
Previous page
1/65
Next page
7
ENEN
6
STANDARD FUNCTIONS
LOADING THE FILM
1
2
3
3. Align the film leader with the
guide line (A), and place the
film between the positioning
guides (B). Then close the
back cover until it clicks.
The film automatically
advances to the first frame.
Open the lens barrier until it
clicks. Make sure the
exposure counter on the
LCD panel reads “ ”.
If “ ” blinks, reload the
film.
The picture area will move lower in the
viewfinder as you get closer to the
subject.
1Close-up correction marks (picture
area at closest distance)
2Picture area at infinity
This camera uses a wide multi-autofocus
system that makes it easier for the
camera to focus on subjects even if they
are not in the center of the viewfinder.
Shoot your subject from a distance of
0.6 m (2.0 ft) to (infinity) .
FOCUSING AND WORKING DISTANCE
CLOSE-UP PHOTOGRAPHY
1
2
STANDARD FUNCTIONS
TAKING PICTURES
1
2
3
Autofocus marks
3. Press the shutter release button
halfway to focus on the subject.
Make sure that the green lamp
lights; then press the shutter release
button all the way to take the picture.
After the shutter is released, the film
automatically advances to the next
frame.
AUTO FLASH — WORKING DISTANCE
(with color negative film)
When reversal film is used, the working range at the telephoto side will be
reduced by about 40%.
The camera automatically rewinds the
film when you reach the end of a roll.
Make sure the motor has stopped and
that “ ” is blinking; then open the
back cover to remove the film.
1. Slide open the back cover release
upward to open the back cover.
Do not touch the inside of the
camera, especially the lens.
2. Insert the film cartridge until it clicks
into position.
1. Open the lens barrier until it clicks.
The lens will extend slightly and the
LCD panel will turn on. Push the
zoom lever to the “T” side for
telephoto (150 mm) or to the “W
side for wide angle (37.5 mm).
After about 4 1/2 minutes of
inactivity, the lens retracts and the
LCD panel goes out.
2. Position the autofocus marks (AF)
on your subject.
Do not look at the sun or other
strong light sources through the
viewfinder.
FILM REWINDING AND UNLOADING
ISO
100
200
400
Wide angle (W)
0.6 to 5.4 m (2.0 to 17.7 ft)
0.6 to 7.6 m (2.0 to 24.9 ft)
0.6 to 10.8 m (2.0 to 35.4 ft)
Telephoto (T)
0.8 to 2.1 m (2.6 to 6.9 ft)
0.8 to 3.0 m (2.6 to 9.8 ft)
0.8 to 4.2 m (2.6 to 13.8 ft)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympus mjuIII 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympus mjuIII 150 in the language / languages: Dutch as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info