569260
2
Zoom out
Zoom in
Previous page
1/3
Next page
Important safety rules
Please read the instructions thoroughly before using the device to make sure that you
are able to use all of its functions.
Keep children and pets away from the device. The device may only be used by adults.
The device can only be used by one person at a time. Do not conduct any other activi-
ties on the device (e.g. cleaning) when it is in use.
Have any necessary repairs performed by qualified specialist personnel.
Protect the device against direct sunshine, extreme heat and moisture.
The following warning sign is attached to the bottom of the device.
Achtung
Gefahr eines elektrischen Schlages!
Gerät nicht öffnen!
Keinerlei vom Benutzer austauschbare Teile inseitig.
Gerät nur von geschultem Fachpersonal öffnen lassen.
Failure to observe this warning sign can lead to injuries.
Safety symbols
Do not reach into the infeed slot.
Do not insert paper clips or
staples into the infeed slot.
Keep ties, scarves, loose cloth-
ing and long necklaces or
bracelets out of the area around
the infeed slot.
Keep long hair out of the area
around the infeed slot.
Caution: failure to observe these safety symbols can lead to serious injuries.
If an object (sleeve, tie, etc.) is inadvertently fed into the infeed slot, pull out the
mains plug immediately.
Electrical safety guidelines
- Pull out the mains plug before emptying the paper collecting basket, cleaning the
device or if the device is not going to be used for a long time.
- If the mains cable, mains plug or the device itself is damaged do not operate the
device any longer (danger of injuries).
- Do not overload the recommended capacity of the mains socket.
- Do not make any alterations to the mains cable as it has been designed for the spe-
cified mains voltage.
Operating elements
The sliding switch (OFF / ON/AUTO / REVERSE) on the device has the following
functions.
OFF position: the device is switched off.
ON/AUTO position: the device is ready for operation.
REV position: the cutting unit runs in reverse. To hold the rest of the paper back, you
can push the sliding switch in the REV position. The cutting unit runs backwards and
pushes the paper back.
The device also has a microswitch:
shredding starts as soon as paper in inserted in the infeed slot.
Materials suitable for destruction
Only use the PS-35CC paper shredder to shred paper. The paper must be dry and
must correspond to the specifications listed in the technical data. Shredding other
materials can lead to injuries (for example, if solid material splinters) or damage to the
device (destruction of the cutting unit, etc.).
Do not shred endless paper documents with this device. Remove all paper clips and
staples before feeding paper into the device.
Starting up
- Take the device carefully out of the packaging and place it on the paper collection
basket. The bulge in the paper collection basket must point to the front. The device
can only be operated when it has been put properly in place (contact switch).
- Plug the mains cable into the socket. Please observe the energy supply specificati-
ons on the back of the device in your safety measures.
- The socket and the mains connection of the device must be freely accessible for
safety reasons so that the power supply can be disconnected in emergencies.
Paper supply
- Switch the device on with the sliding switch (ON/AUTO position).
- Feed the paper to the cutting unit through the infeed slot.
- The device runs forwards and draws the paper in.
- The device switches off automatically after the shredding cycle. The motor carries on
running for another 2-3 seconds to remove the remaining paper from the cutting unit.
Caution:
the sheet capacity given in the technical data may not be exceeded as oth-
erwise a paper jam will occur. Remember that the thickness of the paper increases
when it is folded and the recommended sheet capacity may be exceeded in this way.
Reduce the quantity of paper fed if it is coarse fibre paper.
it is recommended not to fill the paper collection basket up to the cutting unit. This
prevents cut material becoming jammed in the cutting unit.
Empty the paper collection basket at regular intervals.
Caution
Danger of electric shocks!
Do not open the device.
Device contains no user-serviceable parts.
Device should only be opened by trained
specialist personnel.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia PS-35CC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia PS-35CC in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olympia PS-35CC

Olympia PS-35CC User Manual - German - 3 pages

Olympia PS-35CC User Manual - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info