• PCI Countdown Timer 1:59 to 0:00 min:sec 1 second
• Altitude Level Sea, EL-2 to EL-7 1 (level)
• Time to Fly 23:50 to 0:00 hr:min 1 minute
• Time to Desaturate 23:50 to 0:00 hr:min 1 minute
• Temperature 0 to 99°F (-18 to 60°C) 1°F (C)
• Depth (display) 0 to 399 FT (120 M) 1 FT (0.1/1 M )
• Max Op Depth (NORM/FREE) 330 FT (100 M)
• Max Op Depth (GAUG) 399 FT (120 M)
• Tank Pressure 0 to 5000 PSI (345 BAR) 5 PSI (1 BAR)
• NORM/GAUG SI Time 0:00 to 23:59 hr:min 1 minute
• NORM/GAUG Dive Number 0 to 24 1 (dive)
• NORM/GAUG EDT 0 to 599 min 1 minute
• NORM DTR 0 to 199 min 1 minute
• NORM/GAUG ATR 0 to 199 min 1 minute
• FO2 (1, 2, 3, 4) Set Points Air, 21 to 100 % 1 %
• PO2 Value 0.00 to 5.00 ATA .01 ATA
• O2 Saturation 0 to 100 % 1 %
• No Deco Deep Stop Time 2:00 to 0:00 min:sec 1 second
• No Deco Safety Stop Time 5:00 to 0:00 min:sec 1 second
• Safety Stop Run Timer 0:00 to 9:59 min:sec 1 second
• GAUG Dive Run Timer 0 to 999 min 1 minute
• Deco Stop Time 1 to 599 min 1 minute
• Total Ascent Time 1 to 599 min 1 minute
• Violation Countdown Timer 23:50 to 0:00 hr:min 1 minute
• FREE SI Time (< 1 hr) 0:00 to 59:59 min:sec 1 second
• FREE SI Time (=> 1 hr) 1:00 to 23:59 hr:min 1 minute
• FREE Dive Number 0 to 99 1
• FREE Countdown Timer 59:59 to 0:00 min:sec 1 second
• FREE EDT (< 1 min) 0:00 to 9:59 sec 1 second
• FREE EDT (=> 1 min) 10 to 599 min 1 minute
• Compass Heading 001 to 360° 001°
• Compass Op Time Remaining 15 to 1 sec 1 sec
SPECIFICATIONS (CONTINUED)
WARNING: If your VT 4.0 stops working for any reason while operating as a Dive Computer, it is important that
you have anticipated this possibility and are prepared for it. This is an important reason for not pushing the no
decompression and oxygen exposure limits, and a critical reason to avoid entering decompression.
If you dive in situations where your trip would be ruined or your safety would be jeopardized by losing the use of
your VT 4.0, a backup instrument system is highly recommended.
FCC ID: MH8A
FCC COMPLIANCE:
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.) this equipment may not cause harmful interference, and 2.) this equipment must accept any interference received,
including interference that may cause undesired operation.
FCC INTERFERENCE STATEMENT:
This equipment has been tested and found to comply with the limits for an Intentional Radiator, a Class B Digital Device, pursuant to Part 15 of FCC Rules, Title 47 of the Code of Federal Regulations. These rules are designed to
provide reasonable protection against harmful interference in a commercial or residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician.
Warning: Changes or modifications to this unit not expressly approved by Oceanic/2002 Design could void the user's authority to operate the equipment.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Oceanic VT 4.0 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Oceanic VT 4.0 in the language / languages: English as an attachment in your email.
The manual is 13,14 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
