• Dive Computer (Air or Nitrox) with up to 4 Gases up to 100% O2 and 4 Transmitters.
• Digital Depth Gauge/Timer with up to 4 Transmitters.
• Free Dive (breath hold) activity with Depth Gauge/Countdown Timer.
• Compass.
• Buhlmann ZHL-16c based Pelagic Z+, or DSAT based, algorithm.
• No Deco limits closely follow PADI RDP.
• Decompression in agreement with Buhlmann ZHL-16c and French MN90.
• No Deco Deep Stops >> Morroni, Bennett.
• Deco Deep Stops (not recommended) >> Blatteau, Gerth, Gutvik.
• Altitude >> Buhlmann, IANTD, RDP (Cross).
• Altitude corrections and O2 limits based on NOAA tables.
• Battery and Pressure check
> every 2 seconds when awake
• Startup
> Pressure => 120 PSI (8 BAR)
> Battery => 2.75 volts
• Shutdown
> Pressure < 50 PSI (3.5 BAR)
• When packaged and shipped from the factory, Oceanic Transmitters are rated for use with compressed Air and Nitrox mixtures containing up to 99% O2 by volume and with 100% O2.
Accuracy:
• Depth ±1% of full scale
• Timers 1 second per day
• Must rst be activated by button press, if Wet Activation is set OFF.
• Automatic by immersion in water, if Wet Activation is set ON.
• Cannot be manually activated deeper than 4 FT (1.2 M), if Wet Activation is set OFF.
• Cannot operate as a DC at elevations higher than 14,000 feet (4,270 meters).
• 2 hours after activation, if no dive conducted.
• 24 hours after conducting a dive, if no further dives conducted.
• NORM/GAUG displays Dives #1 to 24, FREE displays #1 to 99 (0 if no dive made yet).
• Resets to Dive #1, upon diving (after 24 hours with no dives).
• Stores 24 most recent NORM/GAUG dives in memory for viewing.
• After 24 dives, adds 25th dive in memory and deletes the older dive.
• Operational from sea level to 14,000 feet (4,270 meters) elevation.
• Measures ambient pressure upon activation and every 15 minutes while in Surface modes.
• Does not measure ambient pressure when Wet.
• Compensates for Altitudes above sea level beginning at 3,001 feet (916 meters) elevation and every 1,000 feet (305 meters) higher.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Oceanic VT 4.0 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Oceanic VT 4.0 in the language / languages: English as an attachment in your email.
The manual is 13,14 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
