618128

Numark Mixtrack Pro II Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
5
13. Sync – Enables BPM syncing between decks for the software tracks. To manually adjust BPM and exit
Sync mode press and hold Shift and then Sync.
14. Effect Control – Adjusts the effect parameter in the software. Hold Shift + FX Control to select the
effect.
15. Beats Multiplier – Increases and decreases the rate of the effects to the beat. When using a time-
based effect, this knob adjusts its time division.
16. Loop In – Press this pad to set the beginning of a loop when in Looping Mode. After a Loop Out point
is set and this button is pressed again, it will allow for fine adjustment of the Loop In point. Pressing
Shift + Loop In will set the current Pad Mode as “Looping Mode”. See the PAD MODE COMMANDS
section for information on this pad’s additional functions.
17. Loop Out – Press this pad to set the end of a loop when in Looping Mode. When this button is pressed
again after a Loop Out point has been set, it will allow for fine adjustment of the Loop Out point.
Pressing Shift + Loop Out will set the current pad mode to “Sample (S)” Mode. See the PAD MODE
COMMANDS section for information on this pad’s additional functions.
18. Reloop – Press this pad when inside a loop to turn the loop off. When this button is pressed again
outside a loop, this will activate the loop and start playback from its Loop In point. If a loop has not been
set, this button will have no effect. Pressing Shift + Reloop will set the current pad mode to “Hot Cue
Mode”. See the PAD MODE COMMANDS section for information on this pad’s additional functions.
19. Loop x1/2 – Press this pad to reduce the currently playing loop length by half when in Looping Mode. If
a loop is not playing, this will set the autoloop length. Hold Shift + Loop 1/2 to double the loop length.
See the PAD MODE COMMANDS section for information on this pad’s additional functions.
20. FX1 On/Off – Turns FX1 on and off. Hold Shift + FX1 to set and start playback of a 1-beat autoloop.
21. FX2 On/Off – Turns FX2 on and off. Hold Shift + FX2 to set and start playback of a 2-beat autoloop.
22. FX3 On/Off – Turns FX3 on and off. Hold Shift + FX3 to set and start playback of a 4-beat autoloop.
23. Tap – Press this pad 4 or more times to manually enter a new BPM for the Beats Multiplier. The Beats
Multiplier will ignore the track's BPM and follow your manually entered tempo. Hold Shift + Tap to set
and start playback of a 16-beat autoloop.
24. Channel Volume – Adjusts the volume of the individual channels in the software.
25. Master Volume – Adjusts the volume of the master mix coming from the software.
Note: This does not affect the microphone volume. Use the Mic Gain knob to control the microphone
volume.
26. Crossfader – Controls the blend between the two decks.
27. High EQ – Controls the treble frequencies for the individual channels.
28. Mid EQ – Controls the mid range frequencies for the individual channels.
29. Low EQ – Controls the bass frequencies for the individual channels.
30. Cue Gain – Adjusts the volume for headphone cueing in the software.
31. Cue Mix – Adjusts the software’s audio output to the headphones, mixing between the cue output and
the master mix output.
32. Stutter – Press this button while the music is playing to jump back to the last set cue point, creating a
"stutter" effect.
COMBINATION KEYS
Shift + Pitch Bend - = Allows you to change the tempo of the track without changing the original key of the
song (0% pitch).
Shift + Pitch Bend + = Adjusts the range of the pitch fader in the software.
Shift + FX Control = Selects the effect.
Shift + FX1 = Sets and starts playback of a 1-beat autoloop.
Shift + FX2 = Sets and starts playback of a 2-beat autoloop.
Shift + FX3 = Sets and starts playback of a 4-beat autoloop.
Shift + Tap = Sets and starts playback of a 16-beat autoloop.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark Mixtrack Pro II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark Mixtrack Pro II in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info