698351
52
Zoom out
Zoom in
Previous page
1/54
Next page
Use Ethernet to increase reliability of Nokia WiFi connections
In their default configuration, Nokia WiFi devices connect to one another using Wi-Fi
connections. They use these connections to communicate and share information about both
the network and its connected clients. If you have the infrastructure support necessary to do
so, you may choose to connect your Nokia WiFi devices using Ethernet cables, which would
result in wired connections. These can offer faster speeds, lower latency, and no interference
all characteristics that are common to wireless connections.
IMPORTANT
The Ethernet cables must not pass through an Ethernet switch or other router
Factory reset a Nokia WiFi device
This procedure returns your Nokia WiFi device to its "out-of-box" state. You may elect to
factory reset devices on your own or as directed by a Nokia Care Agent. There are two
scenarios where factory resetting a Nokia WiFi device may be warranted:
1. Incomplete device configuration during Nokia WiFi setup/onboarding.
2. Re-deployment of your Nokia WiFi network to a new location.
IMPORTANT
The need to factory reset one Nokia WiFi device means that ALL your devices
must be factory reset, starting with the device acting as the gateway and
followed by any extender devices. Failure to do so will generate a wireless
network with incomplete or mismatched configuration data.
FACTORY RESET PROCEDURE
1. Using a paper clip or SIM tray removal tool, on the back of each powered-on Beacon,
press the Reset button for ~10 seconds, or until the LED flashes red.
2. The LED turns solid white, which indicates the Beacon has entered boot-up phase.
3. The LED flashes yellow, which indicates the Beacon has been factory reset and is ready
for configuration.
4. Once all Beacons are factory reset, refer to one of the "Setup your Nokia WiFi" sections
and setup your Nokia WiFi from scratch.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia WiFi Beacon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia WiFi Beacon in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info