4.3. Adjusting standard settings for drinks with milk
(CAPPUCCINO, CAFFÈ LATTE, LATTE MACCHIATO, WARM MILK, HOT MILK, MILK FROTH)
Ex-factory the standard settings are
• for Cappuccino: strength standard, quantity 200ml, aroma prole “CONSTANT”,
the display shows “200ml ooo ll”
• for Caffèe Latte: strength standard, quantity 200ml, aroma prole “CONSTANT”,
the display shows “200ml ooo ll”
• for Latte Macchiato: strength standard, quantity 300ml, aroma prole “CONSTANT”,
the display shows “300ml ooo ll”.
• for warm milk: quantity 150ml, the display shows “150ml”.
• for hot milk: quantity 150ml, the display shows “150ml”.
• for milk froth: quantity 150ml, the display shows “150ml”.
Using the frother you can draw milk directly from the carton or any other container and pour it
straight into a cup or glass.
Connect the suction hose to the height-adjustable spout (g.7).
Connect the other end of the hose to the MilkCooler (g. 8) or immerse it straight into the carton
or another container.
Attention: Dried milk residue is difcult to remove. Please clean thoroughly as soon as it has cooled
off! Always follow the display instruction “CLEAN FROTHER”.
The following instructions apply when the ex-factory is set as “OFF” (see 3.7.5.) under
“QUICK START” in the menu “COMFORT SETTINGS”..
Place a cup or a glass under the spout (g. 5).
Turn the rotary control to the drink of your choice (e.g. “LATTE MACCHIATO”) and press it or
touch the requested drink symbol.
Note: In the top line the display shows the current settings of the chosen coffee specialty. Volume on
the left, strength in the centre and aroma on the right.
Turn the rotary control until the display turns blue in the required setting and press it.
Turn the rotary control to change the setting and press it to conrm.
Note: All settings displayed in the top line can be changed before you start brewing.
Press the rotary control to start the brewing process after having changed the settings or touch
“START”.
The cup light is switched on and the appliance prepares a cup or glass of your selected drink in the
standard setting.
Brewing two cups:
To brew two cups one directly after the other, press the rotary control immediately after the start
of the process or touch the cup symbol below centre.
The display shows numbers “1“ or “2“ in the centre below.
If you want to stop the process, simply press the rotary control again.
The display shows “ABORTED”. The appliance cancels the process and returns to main menu.
The standard setting can be altered in two different ways:
4.3.1. Live programming
You can change and save the standard setting during the brewing process as follows.
Turn the rotary control in the main menu to “SETTINGS” and press it or touch the settings
symbol.
Turn the rotary control to “DRINK RECIPES” and press it.
Turn the rotary control to the drink of your choice (e.g. “LATTE MACCHIATO”) and press it.
Turn the rotary control to “LIVE PROGRAMMING”.
To change the standard setting, now press the rotary control.
Cappuccino, Caffè Latte and Latte Macchiato:
The display shows “SELECT STRENGTH”.
Turn the rotary control to select the strength of your choice (left for weaker, right for stronger
coffee).
Press the rotary control to conrm your choice of strength.
The display shows “SELECT AROMA”.
Turn the rotary control to select the aroma of your choice (see 3.3. for information about the
aroma proles).
Press the rotary control to conrm your aroma choice.
The display shows “PLEASE WAIT”. The appliance heats up and will start the preparation.
Latte Macchiato, Warm Milk, Hot Milk and Milk Froth:
The milk will be prepared rst.
The display shows “STOP MILK?”
Press the rotary control when the required amount of milk is reached.
All drinks with milk:
The froth is made next.
The display shows “STOP FROTH?”
Press the rotary control when the required quantity of froth is reached.
Cappuccino, Caffè Latte and Latte Macchiato:
Finally the coffee is brewed.
The display shows “STOP COFFEE?”
Press the rotary control when the required quantity of coffee is reached.
The standard setting for the drink of your choice (e.g. Latte Macchiato) has now been altered and
saved. The display shows “RECIPE SAVED” for a short time and will then switch back to the main
menu with the new standard settings.
4.3.2. Manual programming
You can also change the standard settings manually as follows.
Turn the rotary control in the main menu to “SETTINGS” and press it or touch the settings symbol.
Turn the rotary control to “DRINK RECIPES” and press it.
Turn the rotary control to the drink of your choice (e.g. “LATTE MACCHIATO”) and press it.
Select strength (Cappuccino, Caffè Latte and Latte Macchiato)
Turn the rotary control to “STRENGTH” and press it.
Turn the rotary control to select the strength of your choice (left for weaker, right for stronger cof-
fee). Press the rotary control to conrm the setting.
Select aroma (Cappuccino, Caffè Latte and Latte Macchiato)
Turn the rotary control to “AROMA” and press it.
Turn the rotary control to select the aroma of your choice (see 3.3. for information about the
aroma proles). Press the rotary control to conrm the setting.
Select preparation (Cappuccino and Caffè Latte)
Turn the rotary control to “PREPARATION“ and press it.
88 89
4. Preparing coffee specialities 4. Preparing coffee specialities
