609460
84
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH USER MANUAL
22 SCRUBTEC R 466 - R 471 - R 471C - BOOST
®
R4 9098960000(1)2011-04 A
MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following chart provides the scheduled maintenance. The intervals shown may vary according to particular working conditions,
which are to be de ned by the person in charge of the maintenance.
WARNING!
The procedures must be performed with the machine off and the battery disconnected.
Moreover, carefully read the instructions in the Safety chapter.
All scheduled or extraordinary maintenance procedures must be performed by quali ed personnel, or by an authorised Service
Center.
This Manual describes only the easiest and most common maintenance procedures.
NOTE
For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be
consulted at any Service Center.
SCHEDULED MAINTENANCE TABLE
Procedure
Daily, after
using the
machine
Weekly
Every six
months
Yearly
Battery charging
Squeegee cleaning
Brush/pad cleaning
Tank, debris collection grid and vacuum grid with oat cleaning, and
cover gasket check
Chemical Mixing System cleaning and draining (optional)
Squeegee blade check and replacement
Side skirt check (only for SCRUBTEC R 471C)
Solution lter cleaning
Vacuum system motor lter cleaning
Battery (WET) uid level check
Screw and nut tightening check (1)
Check and adjustment of driving belts between motors and cylindrical
brushes (only for SCRUBTEC R 471C)
(2)
Electromagnetic brake ef ciency check (2)
Brush/pad-holder motor carbon brush check or replacement (2)
Vacuum system motor carbon brush check or replacement (2)
Drive system motor carbon brush check or replacement (2)
And after the rst 8 working hours.(1)
This maintenance procedure must be performed by Nil sk Alto authorised Service Center.(2)
MACHINE WORKING HOUR CHECK
Insert the ignition key (58) and turn it to “I”.1.
In the rst 2 seconds of machine operation, the display (71) shows the total number of working hours (scrubbing/drying) 2.
performed by the machine.
Turn the ignition key (58) to “0”.
9098960000(1)2011-04 A.indb 229098960000(1)2011-04 A.indb 22 07/04/2011 15:59:2207/04/2011 15:59:22
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SCRUBTEC R 466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC R 466 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info