609460
79
Zoom out
Zoom in
Previous page
1/124
Next page
USER MANUAL
ENGLISH
9098960000(1)2011-04 A SCRUBTEC R 466 - R 471 - R 471C - BOOST
®
R4 17
Solution/clean water tank lling
NOTE
If the machine is equipped with Chemical Mixing System (optional) the tank must be lled with clean water, otherwise the
tank must be lled with solution.
CAUTION!
Use only low-foam and non- ammable detergents, intended for automatic scrubber applications.
WARNING!
When using oor cleaning detergents, follow the instructions on the labels of the detergent bottles.
To handle oor cleaning detergents, wear suitable gloves and protections.
Open the ller neck (23).1.
(For machines without Chemical Mixing System)2.
Fill the tank (22) with a solution suitable for the work to be performed.
Do not ll the tank (22) completely, leave a few inches from the edge of the ller neck (23).
Always follow the dilution instructions on the label of the chemical product used to prepare the solution.
The solution temperature must not exceed 40 °C.
(For machines with Chemical Mixing System)
Fill the tank (22) with clean water.
Do not ll the tank (22) completely, leave a few inches from the edge of the ller neck (23).
The water temperature must not exceed 40 °C.
Detergent tank replacement (for machines with Chemical Mixing System)
Open the cover (20) and check that the recovery tank (19) is empty, otherwise empty it with the drain hose (24).1.
Close the cover (20).2.
Carefully lift the tank assembly (44).3.
Open the detergent tank plug (42).4.
Remove the empty container and replace it with a new one.5.
Insert the hose properly and screw down the plug on the detergent tank.6.
NOTE
If the detergent tank is empty (in case of new system, system emptied for cleaning, etc.), in order to ll the hose quickly,
it may be useful to drain the Chemical Mixing System once or several times (see the procedure in Maintenance chapter).
Drivers position adjustment
Using the lever (73), adjust the height of the steering wheel (1) to reach a comfortable position.1.
9098960000(1)2011-04 A.indb 179098960000(1)2011-04 A.indb 17 07/04/2011 15:59:2107/04/2011 15:59:21
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SCRUBTEC R 466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC R 466 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info