552651
46
Zoom out
Zoom in
Previous page
1/47
Next page
44
Advanced Configuration Using the Integrated SSH Shell
In most cases, configuring the NewStar Digital KVM via IP to the same settings as the
Serial Supervisor devices you are connecting should allow the devices to work with a
minimum amount of configuration. However, you can also change the default settings on
each Serial Supervisor device to fit your preferences and the needs of your application.
If you click the Connect… button next to the device you want to configure, two new
windows will appear. The smaller of the two is a login screen; the other is a SSH terminal
window. Click the login window and sign in as admin (using the same password as the
Web interface) to activate the terminal window. You will see a welcome banner similar to
the following:
Baud rate: 115200 bps, 8N1
Connected to #1: (none)... (Press Ctrl + Shift + Space for menu).
You are now connected to the Serial Supervisor device. Commands you type will be
echoed on the terminal screen. It offers a simple menu system that allows you to change
its configuration settings. To access the menu press Ctrl + Shift + Space
(underscore) on the keyboard to access the menu. It will be similar to the following:
RS-232 Menu (#1: (none), 115200 bps, 8N1)
Q – Disconnect
# - Send break
H – Hangup line (drop DCD)
E – Send Ctrl-Shift-_
L – Low log entries (line buffer)
1 – Show last 10 log entries
other – Return to connection
Press key ->
To execute the desired command, simply press the corresponding key on the keyboard.
You can also execute the command and avoid the menu by pressing the Ctrl + Shift +
Space key combination quickly and pressing the letter of the command. To quit the menu,
press Q on the keyboard when the menu is active.
Remote Login via SSH
You can also use a standard SSH client to access the Serial Supervisor options if you
wish to avoid using the Java-based SSH client in the Web interface. Simply use your SSH
client (several freeware packages are available for download, along with commercial
applications) and connect to the IP address of the NewStar Digital KVM via IP using port
22 (default).
Login in to the SSH session as admin using the same password as the Web interface. At
the command prompt type connect x (where x is the number of the Serial Supervisor
device you wish to manage). Alternatively, you can enter the command connect -l to see
a list of active devices.
Operating Notes
y Hardware handshaking (CTS/RTS) is required for speeds exceeding 9600 bps. It is
enabled by default on the NewStar Digital KVM via IP, but may need to be enabled
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newstar NS-841HDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-841HDI in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info