670517
2
Zoom out
Zoom in
Previous page
1/2
Next page
Rack-Mount the Switch
We recommend that you use the rack-mount brackets and screws that are
supplied with the switch.
1. Attach the supplied mounting brackets to the side of the switch.
Insert the screws through each bracket and into the bracket mounting holes
in the switch.
2. Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
3. Align the mounting holes in the brackets with the holes in the rack, and insert
two pan-head screws with nylon washers through each bracket and into the
rack.
4. Tighten the screws with a No. 2 Phillips screwdriver to secure mounting
brackets to the rack.
Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you
use only ocial NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à http://downloadcenter.netgear.com/other/.
(If this product is sold in Canada, you can access this document in Canadian
French at http://downloadcenter.netgear.com/other/.)
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/11621.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Access the Switch
By default, the switch receives an IP address from a DHCP server (or router that
functions as a DHCP server) in your network. You can access the switch from a
Windows-based computer, from a Mac, or from a mobile device on which the
NETGEAR Insight app is installed.
For information about accessing the switch from Mac, see the user manual,
available at www.netgear.com/support.
You can also access the switch through the ProSAFE Plus Configuration Utility,
which you can download by visiting www.netgear.com/support/product/PCU.
Access the Switch From a Windows-Based Computer
1. Open Windows Explorer.
2. Click the Network link.
3. If prompted, enable the Network Discovery feature.
4. Under Network Infrastructure, locate the switch.
5. Double-click XS512EM or XS724EM (xx:xx:xx:xx:xx:xx) (where
xx:xx:xx:xx:xx:xx is the MAC address of the switch).
The login page of the web management interface opens.
6. Enter the default switch password, which is password.
The Home page displays the IP address of the switch.
Make sure that you are running the latest firmware version on your device. To find
documentation, firmware, soware, or other files, visit www.netgear.com/support.
Access the Switch From the NETGEAR Insight Mobile App
During initial setup, you must connect the switch to a WiFi network so that you
can access the switch from your mobile device with a local WiFi connection.
1. On your iOS or Android mobile device, visit the app store, search for NETGEAR
Insight, and download the app.
2. Connect your mobile device to the WiFi network of the access point that is
connected to the switch.
3. Open the NETGEAR Insight app on your mobile device.
4. If you did not set up a NETGEAR account yet, tap CREATE NETGEAR
ACCOUNT and follow the onscreen instructions.
5. To log in to your NETGEAR account, tap LOG IN and enter your credentials.
6. Name your network and specify a device admin password that applies to all
devices that you add to this network.
7. Tap the NEXT button.
8. Add the switch from one of the following pages:
Day Zero discovery page
Network page
Device List page
Note: You might be prompted to connect the switch to power and to an
uplink. Since you already did this (see Connect the Switch to Your Network),
tap the NEXT button.
The NETGEAR Insight app discovers the switch and registers it on the network
that you named in Step 6. If the app does not discover the switch, make
sure that your mobile device and the switch are connected to the same WiFi
network.
9. Select the switch to configure and manage it.
Insight
October 2017
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Speed Cable Type
100 Mbps Category 5 (Cat 5) or higher rated
1 Gbps, 2.5 Gbps, or 5 Gbps Category 5e (Cat 5e) or higher rated
10 Gbps Category 6A (Cat 6A) or higher rated
Note: For speeds of 10 Gbps, if the cable length is shorter than 180 feet (55
meters), you can use a Category 6 (Cat 6) cable.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XS512EM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XS512EM in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XS512EM

Netgear XS512EM User Manual - English - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info