608669
2
Zoom out
Zoom in
Previous page
1/2
Next page
May 2008
Safety Warning: The socket-outlet shall be installed near the equipment and shall be easily accessible.
This symbol was placed in accordance with the European Union Directive 2002/96 on the
Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the
European Union, this product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
© 2008 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered
trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of their respective holders. Information is subject to
change without notice.
Console
Gaming
Set-top
Box
LEDs, Security Button, and Reset Button
To set the security on your Powerline adapters, see the XAV101 Powerline AV Ethernet
Adapter User Manual, located on your Resource CD, and also available at
http://www.NETGEAR.com/support
Warning: Do not press the Security button on the Powerline AV Ethernet Adapter until
installation is complete and the adapters are communicating with each other. Pressing this
button too soon can temporarily disable Powerline communication. If this should occur, press
the Reset button for 2 seconds to return the Powerline AV Ethernet Adapter to its factory
default settings.
LED Description
Power Solid. The electrical power is on.
Blinking. The adapter is in the process of resetting or security setup.
Off. There is no electrical power.
Powerline Solid. The adapter is connected to a Powerline network.
Blinking. The adapter is sending or receiving data.
Off. The adapter has not found any other compatible Powerline devices
using the same encryption key.
Green: Link rate > 80
Mbps
Orange: Link rate > 50
and < 80 Mbps
Red: Link rate < 50
Mbps
Ethernet Solid. The Ethernet port is linked, but there is no activity.
Blinking. There is traffic between an Ethernet port and the Powerline
network.
Off. There is no Ethernet connection.
Powerline LED
Ethernet LED
Power LED
Security
button
Reset
button
Ethernet port
Troubleshooting Tips
Technical Support
Thank you for selecting NETGEAR products. After completing installation, register your
product at http://www.NETGEAR.com/register.
Registration on the website or over the phone is required before you can use our telephone
support service. The phone numbers for worldwide regional customer support centers are on
the Warranty and Support Information card that came with your product.
Go to http://www.NETGEAR.com/support for product updates and Web support.
Power LED is off. Make sure that power is supplied to the electrical outlet, and that the
Powerline devices is not plugged into an extension cord, power strip,
or surge protector.
Powerline LED is
off.
Make sure that the Powerline devices are plugged into outlets with
power.
Move the Powerline device to a closer location.
If you have set network security, make sure that all Powerline
devices are using the same encryption key.
Reset the devices to factory default settings. Refer to the User
Manual for instructions.
Ethernet LED is
not blinking.
Make sure that your router and modem are on and working correctly.
Make sure that the Ethernet cables are working and securely
plugged into the devices.
Reset the devices to factory default settings. Refer to the User
Manual for instructions.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAV101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAV101 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XAV101

Netgear XAV101 User Manual - English - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info