670506
7
Zoom out
Zoom in
Previous page
1/78
Next page
Hardware Setup
7
N150 and N300 Wireless Routers
Hardware Features
Before you cable your router, take a moment to become familiar with the product label and
the front and back panels. Pay particular attention to the LEDs on the front panel.
Front Panel LEDs
The router front panel has the following status LEDs.
Table 1. Front panel LED descriptions
LED Description
Power
Solid green. The power is on, and the router is ready.
Blinking green. A
firmware update is in progress.
Off. Power is not supplied to the router.
Internet
Solid green. An IP address was received; the router is ready to transmit data.
Off. No Ethernet cable is connected between the router and the modem.
WiFi
Solid green. The wireless radio is operating.
Off. The
wireless radio is off.
Ethernet ports 1–4
Solid green. The Ethernet port has detected a 100 Mbps link with an attached
device.
Off.
The Ethernet port has not detected a link with an attached device.
Back Panel
The back panel has the following ports, button, and connector.
Table 2. Back panel port, button, and connector descriptions
Port or Connector Description
Ethernet ports Four local area networks (LAN) Ethernet ports for connecting the router to
your local computers.
Internet port Ethernet port for connecting the router to a cable broadband modem or DSL
broadband modem.
The Internet port is also referred to as the WAN port.
AC power connector AC power connector to connect the power adapter to the router.
WPS/Reset button This button is a WPS and Reset button:
WPS button to connect computer or WiFi devices to the router’
s network.
For more information, see WiFi Connection on page 12.
Reset button to return the router to its factory settings.
For more information, see Factory Settings on page 76.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNR2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNR2050 in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info