710464
63
Zoom out
Zoom in
Previous page
1/79
Next page
DescriptionField
The fragmentation length (the default is 2346), CTS/RTS threshold (the default is
2347), and the preamble mode (the default is Automatic) are reserved for WiFi testing
and advanced configuration only. Do not change these settings unless directed by
NETGEAR support or unless you are sure what the consequences are. Incorrect
settings might disable the WiFi function of the access point unexpectedly.
Fragmentation Length
(256-2346)
CTS/RTS Threshold
(1-2347)
Preamble Mode
6. Click the Apply button.
Your settings are saved.
Set Up a WiFi Distribution System
The access point can function as a WiFi base station or a WiFi repeater in a WiFi distribution system (WDS).
A WDS expands a WiFi network through multiple access points.The access point supports both point-to-point
and point-to-multipoint configurations.
A WiFi base station connects to the Internet, wired and WiFi clients can connect to the base station, and
the base station sends its WiFi signal to one or more access points that function as WiFi repeaters. Wired
and WiFi clients can also connect to a WiFi repeater, but the repeater connects to the Internet through the
WiFi base station.The following figure shows a WiFi repeating scenario with a WiFi base station on the left
side and a single WiFi repeater on the right side.
Figure 8. WiFi repeating scenario with a point-to-point configuration
To use the WiFi repeating function, you cannot use the auto channel feature for the access point, the SSID
broadcast must be enabled, and you cannot use WPA and WPA2 enterprise security.
Manage the Advanced WiFi Features
63
802.11ac Wireless Access
63

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info