665139
212
Zoom out
Zoom in
Previous page
1/213
Next page
Electrical Safety Precautions
Follow basic electrical safety precautions to protect yourself from harm and the ReadyNAS from damage:
Be aware of the locations of the power on/off switch on the chassis as well as the rooms emergency
power-off switch, disconnection switch, or electrical outlet. If an electrical accident occurs, you can then
quickly remove power from the system.
Do not work alone when working with high-voltage components.
Always disconnect power from the system when removing or installing main system components, such
as the main board or memory modules.When disconnecting power, first power down the system with
the operating system and then unplug the power cords of all the power supply storage systems in the
system.
When working around exposed electrical circuits, ensure that another person who is familiar with the
power-off controls is nearby to switch off the power if necessary.
Use only one hand when working with powered-on electrical equipment.This is to avoid making a
complete circuit, which will cause electrical shock. Use extreme caution when using metal tools, which
can easily damage any electrical components or circuit boards they come into contact with.
Do not use mats designed to decrease static electrical discharge as protection from electrical shock.
Instead, use rubber mats that have been specifically designed as electrical insulators.
Use only power supply cords that include a grounding plug and plug them into grounded electrical
outlets.
General Safety Precautions
Follow these rules to ensure general safety:
Keep the area around the ReadyNAS clean and free of clutter.
See the technical specifications in this manual for details about your specific ReadyNAS storage systems.
Replace the on-board battery only with the same battery or an equivalent type of battery recommended
by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
Installing the battery upside down reverses its polarities and creates a danger of
explosion.
Note
Only trained service technicians can replace the soldered-in self-resetting PTC (positive temperature
coefficient) fuses on the main board, using only new fuses that are the same as or equivalent to the
ones being replaced. Contact technical support for details and support.
Electrostatic Discharge Precautions
Electrostatic discharge (ESD) is generated by two objects with different electrical charges coming into contact
with each other. An electrical discharge is created to neutralize this difference, which can damage electronic
components and printed circuit boards.The following measures are generally sufficient to neutralize this
difference before contact is made to protect your equipment from ESD:
Defaults and Technical Specifications
212
ReadyNAS OS 6 Desktop Storage Systems
212


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear ReadyNAS 424 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear ReadyNAS 424 in the language / languages: English as an attachment in your email.

The manual is 13,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info