670484
138
Zoom out
Zoom in
Previous page
1/142
Next page
Test the Path From Your Computer to a Remote Device
To test the path from your computer to a remote device:
1. From the Windows toolbar, click the Start button and select Run.
2. In the Windows Run window, type
ping -n 10 <IP address>
where <IP address> is the IP address of a remote device such as your ISP DNS server.
If the path is functioning correctly, messages display that are similar to those shown in Test the LAN
Path to Your Router on page 137.
3. If you do not receive replies, check the following:
Check to see that IP address of your router is listed as the default gateway for your computer. If
DHCP assigns the IP configuration of your computers, this information is not visible in your computer
Network Control Panel. Verify that the IP address of the router is listed as the default gateway.
Check to see that the network address of your computer (the portion of the IP address specified by
the subnet mask) is different from the network address of the remote device.
Check to see that your cable or DSL modem is connected and functioning.
If your ISP assigned a host name to your computer, enter that host name as the account name on
the Internet Setup page.
Your ISP might be rejecting the Ethernet MAC addresses of all but one of your computers.
Many broadband ISPs restrict access by allowing traffic only from the MAC address of your broadband
modem. Some ISPs additionally restrict access to the MAC address of a single computer connected to
that modem. If your ISP does this, configure your router to “clone” or “spoof the MAC address from the
authorized computer.
Troubleshoot 404 Error Message When Trying to Log In
to Plex Account
Plex Media Server helps you to manage your photos, videos, and audio files that are stored on an external
USB hard drive that is attached to your router.The router support Plex Media Server in both router mode
and AP mode. However, when your router is in AP mode, an error 404 error message might display when
you try to log in to your Plex account while using Windows 10.
To resolve a 404 error message after enabling Plex on your router
1. From your computer's hpme screen, right-click the network icon on the lower-right corner.
2. Select Open Network and Sharing Center > Change adapter settings.
3. Right-click the network adapter that connects to the router and select Properties.
4. In the Connection Properties window, clear the Internet Protocol Version 6 (TCP/IP) check box and
click the OK button.
Your settings are saved.
Troubleshooting
138
Nighthawk X6S AC4000 Tri-Band WiFi Router
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R8000P - Nighthawk X6S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R8000P - Nighthawk X6S in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear R8000P - Nighthawk X6S

Netgear R8000P - Nighthawk X6S Quick start guide - English - 2 pages

Netgear R8000P - Nighthawk X6S User Manual - German - 152 pages

Netgear R8000P - Nighthawk X6S Quick start guide - German - 2 pages

Netgear R8000P - Nighthawk X6S Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info