706130
1
Zoom out
Zoom in
Previous page
1/2
Next page
1. Insert a Nano SIM Card
Note: A nano SIM card is not included
with your 4G LTE Orbi. Get a nano SIM
card from your LTE provider.
IMPORTANT: Make sure that the 4G LTE
Orbi is powered off before inserting a
nano SIM card.
Insert the nano SIM card into the nano
SIM slot on the back of the 4G LTE Orbi.
Note: The 4G LTE Orbi does not
support SIM hot-swapping. If you want
to change the nano SIM card, power off
the 4G LTE Orbi before changing the
nano SIM card.
You can also connect your 4G LTE Orbi
to a cable or DSL modem. For more
information, see the Do More booklet
or the user manual. The user manual
is available online at downloadcenter.
netgear.com.
2. Connect Power to Your
4G LTE Orbi
a. Connect your 4G LTE Orbi router
to a power source.
If the Power LED on the back of the
Orbi router does not light, press the
Power On/O button.
b. Wait for the Orbi router’s ring LED
to light white.
Note: Your 4G LTE Orbi router
tries to connect to the LTE network
automatically. If it cannot, you might
need to manually set the APN. Ask
your internet service provider for
the required APN and follow the
instructions to manually update the
APN while you set up the network.
4G LTE WiFi
Orbi Router
Quick Start
Guide
Nano SIM
connector
3. Connect to the
Internet
a. Connect your computer or mobile
device to the Orbi router with an
Ethernet or WiFi connection:
Ethernet. Use an Ethernet cable to
connect your computer to the Orbi
router.
WiFi. Use the preassigned WiFi
network name (SSID) and password
on the Orbi label to connect to the
Orbi WiFi network.
b. Set up your network using one of
the following options:
NETGEAR Orbi app. Download
the NETGEAR Orbi app on your
mobile device. You can scan a QR
code on the other side of this quick
start guide to get the app. Launch
the app and follow the onscreen
instructions.
Web browser. Launch a web
browser and visit orbilogin.com.
If a login window opens, enter the
user name and password. The user
name is admin and the default
password is password. Follow the
onscreen instructions.
The Orbi router’s ring LED turns
off after the setup is complete.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear LBR20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear LBR20 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info