710798
150
Zoom out
Zoom in
Previous page
1/275
Next page
Configure Quality of Service
150
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Source L4 Port. Select the desired L4 keyword from the list on which the rule can be
based. The options are Other, domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp,
or www. If you select Other, enter a user-defined port ID.
Destination IP. Enter a valid destination IP address in dotted-decimal format.
Destination L4 Port. Enter the desired L4 keyword from the list on which the rule can
be based. The options are Other, domain, echo, ftp, ftpdata, http, smtp, snmp, telnet,
tftp, or www. If you select Other, the screen refreshes and a port ID field appears.
Service Type:
IP DSCP. Select the DSCP type from the list or enter a DSCP value to match. If
you select Other, enter a custom value in the DSCP Value field that appears. The
range is 0–63.
Precedence Value. Enter a precedence value.
4. Click APPLY to send the updated configuration to the switch. Configuration changes occur
immediately.
IPv6 Class Configuration
The IPv6 Class Configuration feature extends the existing QoS ACL and DiffServ
functionality by providing support for IPv6 packet classification. An Ethernet IPv6 packet is
distinguished from an IPv4 packet by its unique EtherType value, so all IPv6 classifiers
include the EtherType field. An IPv6 access list serves the same purpose as its IPv4
counterpart.
When you define a class, you must specify if this class rule is for IPv4 or for IPv6 packets by
using the correct screen (either Class Configuration or IPv6 Class Configuration).
The destination and source IPv6 addresses use a prefix length value instead of an individual
mask to qualify it as a subnet address or a host address. The flow label is a 20-bit number
that is unique to an IPv6 packet, used by end stations to signify some form of Quality of
Service (QoS) handling in routers.
Packets that match an IPv6 classifier are allowed only to be marked using the 802.1p (CoS)
field or the IP DSCP field in the traffic class octet. IP precedence is not defined for IPv6: this
is not an appropriate type of packet marking.
IPv6 ACL and DiffServ assignment are appropriate for LAG interfaces. The procedures
described by an ACL or DiffServ policy are equally applicable on a port or LAG interface.
To configure an IPv6 class:
1. Select QoS DiffServ Advanced IPv6 Class Configuration.
150

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GS752TP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GS752TP in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GS752TP

Netgear GS752TP Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info