710804
36
Zoom out
Zoom in
Previous page
1/38
Next page
Troubleshooting Chart
The following table lists symptoms, possible causes, and possible solutions for problems
that might occur.
Table 6. Troubleshooting chart
Possible SolutionPossible CauseSymptom
Check the power cable connections at the
switch and the power source.
Make sure that all cables are used correctly
and comply with the Ethernet specifications.
Power is not supplied to the switch.Power LED is off.
Make sure that the switch is connected to the
Internet and that you discover and add the
switch to your network by using the NETGEAR
Insight app.
The switch is not connected to the
Internet or is not yet discovered and
activated through the NETGEAR
Insight app.
Cloud Connection LED is off.
Check the crimp on the connectors and make
sure that the plug is properly inserted and
locked into the port at both the switch and
the connecting device.
Make sure that all cables are used correctly
and comply with the Ethernet specifications.
Check for a defective port, cable, or module
by testing them in an alternate environment
where all products are functioning.
Port connection is not working.A combined speed and
activity LED or an individual
speed LED and an individual
activity LED are off when the
port is connected to a device.
Break the loop by making sure that only one
path exists from any networked device to any
other networked device. After you connect
to the local browser interface, you can
configure the Spanning Tree Protocol (STP)
to prevent network loops.
One possible cause is that a
broadcast storm occurred and that
a network loop (redundant path)
was created.
File transfer is slow or
performance is degraded.
Verify that the cabling is correct.
Make sure that all connectors are securely
positioned in the required ports. It is possible
that equipment was accidentally
disconnected.
One or more devices are not
properly connected, or cabling
does not meet Ethernet guidelines.
A segment or device is not
recognized as part of the
network.
Break the loop by making sure that only one
path exists from any networked device to any
other networked device. After you connect
to the local browser interface, you can
configure the Spanning Tree Protocol (STP)
to prevent network loops.
A network loop (redundant path)
was created.
A combined speed and
activity LED or an individual
speed LED and an individual
activity LED are blinking
continuously on all
connected ports and the
network is disabled.
Hardware Installation Guide36Troubleshooting
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GC110P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GC110P in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GC110P

Netgear GC110P Installation Guide - English - 2 pages

Netgear GC110P User Manual - English - 416 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info