710804
2
Zoom out
Zoom in
Previous page
1/2
Next page
February 2018
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
PoE Troubleshooting for Model GC110P
Here are some tips for correcting simple problems that might occur:
Make sure that the PoE Max LED is o. The switch provides a total
power budget of 62 watts. If the PoE Max LED is solid amber,
disconnect one or more powered devices (PDs) to prevent PoE
oversubscription. Start by disconnecting the PD from the highest-
numbered port.
Note: You can manually override the amount of power that is reserved for
each PoE port and attached PD by using the Insight mobile app or the Insight
Cloud Portal.
Check the right LED for the port on the switch that is connected to
a powered PD. The right port LED on the switch lights solid green to
indicate that PoE is being delivered to the PD. If the right port LED
lights solid amber, a PoE fault occurred.
Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support to register your product, get help, access
the latest downloads and user manuals, and join our community. We
recommend that you use only ocial NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à http://downloadcenter.netgear.com/other/.
(If this product is sold in Canada, you can access this document in Canadian-French
at http://downloadcenter.netgear.com/other/.)
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before providing power to
the switch.
Configure the Switch Using the NETGEAR
Insight App
¾ To configure the switch:
1. On your iOS or Android mobile device, visit the app store, search for
NETGEAR Insight, and download the app.
2. Connect your mobile device to the WiFi network of the access point
that is connected to the switch.
For initial configuration, you must use local WiFi access. Aer you
complete initial configuration and discover the switch, you can use
cloud access if the switch is connected to the Internet.
3. Open the NETGEAR Insight app on your mobile device.
4. If you did not set up a NETGEAR account yet, tap CREATE NETGEAR
ACCOUNT and follow the onscreen instructions.
5. To log in to your NETGEAR account, tap LOG IN and enter your
credentials.
6. Name your network and specify a device admin password that applies
to all devices that you add to this network.
7. Tap the NEXT button.
8. To add the switch to your account, use one of the following options:
Enter the serial number.
Scan the serial number bar code.
Tap Switch as the device type and follow the prompts to scan the
network or scan the QR code.
Insight
Note: You might be prompted to connect the switch to power and to
an uplink. Since you already did this (see Connect the Switch to Your
Network, on these screens, tap the NEXT button.
The NETGEAR Insight app discovers the switch and registers it on the
network that you named in Step 6.
If you are using the local WiFi access method and the app does not
discover the switch, make sure that your mobile device and the switch
are connected to the same WiFi network.
9. Select the switch to configure and manage it.
You can use the NETGEAR Insight app to access the switch later to view or
change the configuration settings.
For more information about how to connect a NETGEAR Insight managed
switch to an existing network, visit https://kb.netgear.com/000044341.
Note: We do not recommend using the switchs local browser–based management
interface to configure the switch oine. Changes made using this method are not
pushed to the cloud, so they are not reflected in the Insight app or the Insight Cloud
Portal, and might create conflicts with the Insight-managed network to which the
switch is connected. If you cannot connect your switch to a network with Internet
access, and you want to use the local-only browser interface to access the switch,
see the user manual.
To download the user manual, visit netgear.com/support/product/GC110 or
netgear.com/support/product/GC110P.
Insight
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear GC110P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear GC110P in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear GC110P

Netgear GC110P User Manual - English - 38 pages

Netgear GC110P User Manual - English - 416 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info