670574
98
Zoom out
Zoom in
Previous page
1/102
Next page
Troubleshooting
98
AC1750 WiFi Cable Modem Router
Use Ping to Test the LAN Path to Your Modem Router
You can use ping to verify that the LAN path to your modem router is set up correctly.
To ping the modem router from a computer running Windows 95 or later:
1. From the Windows toolbar, click the Start button and select Run.
2. In the field that is provided, type ping and then the IP address of the modem router, as in
this example:
ping 192.168.0.1
3. Click the OK button.
You see a message like the following:
Pinging <IP address> with 32 bytes of data
If the path is working, you see this message:
Reply from < IP address >: bytes=32 time=NN ms TTL=xxx
If the path is not working, you see this message:
Request timed out
If the path is not working correctly, you one of the following problems might be the cause:
Wrong physical connections.
- Make sure that the LAN LED is lit. If this LED is off, for more information, see Use
LEDs to Troubleshoot on page 96.
- Make sure that the corresponding link LEDs are on for your network interface card
and the hub ports (if any) that are connected to your workstation and modem
router.
Wrong network configuration.
- Verify that the Ethernet card driver software and TCP/IP software are both
installed and configured on your computer or workstation.
- Verify that the IP address for your modem router and your workstation are correct
and that the addresses are on the same subnet.
Use Ping to Test the Path From a Windows Computer to a
Remote Device
After verifying that the LAN path works correctly, test the path from the Windows computer to
a remote device.
To test the path from a Windows computer to a remote device:
1. From the Windows toolbar, click the Start button and select Run.
2. In the field that is provided, type: ping -n 10 <IP address>
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear C6300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear C6300 in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear C6300

Netgear C6300 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info