681368
2
Zoom out
Zoom in
Previous page
1/2
Next page
You’re Done!
Congratulations! Your Arlo product is set up and ready to go.
To view tutorial videos, find troubleshooting tips, or get support, visit
support.arlo.com.
Ceiling and Wall Installation Kit
1 Plastic bracket for either drop ceiling mounting or wall mounting
2 Metal bracket for drop ceiling mounting
3 One metal T-bar for drop ceiling mounting
4 One lock screw to lock the T-bar for drop ceiling mounting
5 Four short screws to attach the metal bracket for drop ceiling mounting
6 Four tall screws to attach the plastic bracket for wall mounting
7 Four anchors for the tall screws for wall mounting
8 Four rubber feet for desk installation
4
5
6
7
8
1
2
3
Drop Ceiling Installation
If you are mounting the base station on a hard ceiling instead of a ceiling bar
that is typical for a drop ceiling, use the wall installation instructions.
1. Slide the T-bar partially into the metal bracket and attach the metal
bracket to the ceiling bar.
Then push the T-bar over the ceiling bar and use the lock screw to lock
the metal bracket into place.
2. Making sure that the two protruding hooks on the plastic bracket are
facing down, place the plastic bracket against the metal bracket and
align the four inner holes of the plastic bracket with the four holes of
the metal bracket.
3. Then insert the four short screws and secure the plastic bracket onto
the metal bracket.
Hold the base station upside down, with the bottom facing the plastic
bracket that is attached to the metal bracket, and align the two
rectangular holes in the bottom of the base station with the protruding
hooks on the plastic bracket
4. Push the hooks into the holes and turn the base station to secure it onto
the plastic bracket.
Result
Wall Installation
1. Place the plastic bracket on the wall where you want to mount the base
station.
2. Mark the wall where the four outer mounting holes are.
3. Using the wall anchors and tall screws, attach the mounting bracket to
the wall.
4. Align the two rectangular holes in the bottom of the base station with
the protruding hooks on the plastic bracket.
5. Push the hooks into the holes and turn the base station to secure it onto
the plastic bracket.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear Arlo FlexPower Base Station VNB4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear Arlo FlexPower Base Station VNB4000 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info