653989
1
Zoom out
Zoom in
Previous page
1/2
Next page
English Suomi
Connect your computer to the projector using the supplied
computer cable (VGA).
Connect the supplied power cord.
Slide the lens cover to the right to uncover the lens.
< Short-Throw model >
Remove the lens cap.
Turn on the projector.
Press the
(POWER) button on the projector cabinet or the POWER ON button on the remote
control.
Select a source.
TIP:
Press the AUTO ADJ. button to optimize an RGB image automatically.
Adjust an image size and the throw angle.
[Focus]
Turn the focus ring or focus lever.
[Zoom]
Turn the zoom ring.
< Short-Throw model >
Adjusting on the displayed DISITAL ZOOM bar.
1. Press the ZOOM button on the remote control.
2. Press the or button.
[Throw angle (Tilt foot)]
1. Lift the front edge of the projector.
2. Push up and hold the Adjustable Tilt Foot Lever.
3. Lower the front of the projector to the desired height.
4. Release the Adjustable Tilt Foot Lever.
TIP:
Automatic Keystone Correction function is turned on at the time of shipment.
Turn off the projector.
1. Press the
(POWER) button on the projector cabinet or the STANDBY button on the remote
control.
2. Press either the
(POWER) or the STANDBY button again.
3. Slide the lens cover to the left to cover the lens.
< Short-Throw model >
Mount the lens cap.
4. Disconnect all the cables.
Kytke tietokone projektoriin mukana toimitetulla tietokonekaapelilla
(VGA).
Kytke mukana toimitettu virtajohto.
Liu'uta linssinsuojusta oikealle paljastaaksesi linssin.
< Short-Throw-malli >
Poista linssinsuojus.
Käynnistä projektori.
Paina projektorikotelon
(VIRTA) -painiketta tai kaukosäätimen POWER ON -painiketta.
Valitse lähde.
VIHJE:
Paina AUTO ADJ. -painiketta optimoidaksesi RGB-kuvan automaattisesti.
Säädä kuvan koko ja heittokulma.
[Tarkenna]
Käännä tarkennusrengasta tai -vipua.
[Zoomaa]
Käännä zoomausrengasta.
< Short-Throw-malli >
Säätäminen näkyvillä olevassa DIGITAALINEN ZOOM -palkissa.
1. Paina kaukosäätimen ZOOM-painiketta.
2. Paina painiketta tai .
[Heittokulma (kallistusjalka)]
1. Nosta projektorin etureunaa.
2. Nosta ja pidä kiinni säädettävän kallistusjalan vivusta.
3. Laske projektorin etuosa haluttuun korkeuteen.
4. Vapauta säädettävän kallistusjalan vipu.
VIHJE:
Automaattinen keystone-korjaustoiminto kytketään päälle toimitushetkellä.
Sammuta projektori.
1. Paina projektorikotelon
(VIRTA) -painiketta tai kaukosäätimen STANDBY-painiketta.
2. Paina uudelleen joko
(VIRTA) tai STANDBY-painiketta.
3. Liu’uta linssinsuojusta vasemmalle peittääksesi linssin.
< Short-Throw-malli >
Kiinnitä linssinsuojus.
4. Irrota kaikki kaapelit.
Magyar Polski
Csatlakoztassa a számítógépet a projektorhoz a mellékelt
számítógépkábel (VGA).
Csatlakoztassa a mellékelt tápkábelt.
Csúsztassa a lencse fedelét jobbra, a lencse takarásának
megszüntetéséhez.
< Rövid vetítési távolságú modell >
Vegye le a lencsevédő sapkát.
Kapcsolja be a projektort.
Nyomja meg a
(áramellátás) gombot a projektor készülékházán vagy a távirányítón találha
POWER ON gombot.
Válasszon ki egy forrást.
TIPP:
Nyomja meg a AUTO ADJ. (Automatikus beáll.) gombot, hogy automatikusan optimalizálja az RGB képet.
Állítsa be a képméretet és a vetítési szöget.
[Fókusz]
Forgassa el a fókuszgyűrűt vagy a fókuszkart.
[Zoomolás]
Forgassa el a fókuszgyűrűt.
< Rövid vetítési távolságú modell >
Beállítás a megjelenített DIGITÁLIS ZOOM eszköztáron.
1. Nyomja meg a ZOOM gombot a távirányítón.
2. Nyomja meg a vagy a gombot.
[Vetítési szög (Dőlésszögállító-láb)]
1. Emelje fel a projektor elülső szélét.
2. Nyomja fel és tartsa nyomva dőlésszögállító-láb kart.
3. Engedje le a projektor elejét a kívánt magasságba.
4. Engedje el a dőlésszögállító-láb kart.
TIPP:
Az automatikus trapézkorrekció funkció be van kapcsolva a gyárból való szállításkor.
Kapcsolja ki a projektort.
1. Nyomja meg a
(áramellátás) gombot a projektor készülékházán vagy a távirányítón
található STANDBY gombot.
2. Nyomja meg a
(ÁRAMELLÁTÁS) és a STANDBY gombot újból.
3. Csúsztassa a lencse fedelét jobbra, a lencse takarásának megszüntetéséhez.
< Rövid vetítési távolságú modell >
Rakja fel a lencsevédő sapkát.
4. Csatlakoztassa le az összes kábelt.
Podłącz komputer do projektora za pomocą dostarczonego przewodu
komputerowego (VGA).
Podłącz dostarczony przewód zasilania.
Przesuń osłonę obiektywu w prawo, aby odsłonić obiektyw.
<model z krótką projekcją>
Zdejmij pokrywkę obiektywu.
Włącz projektor.
Naciśnij przycisk
(POWER) na obudowie projektora lub przycisk POWER ON na pilocie zdalnego
sterowania.
Wybierz źródło.
WSKAZÓWKA:
Naciśnij przycisk AUTO ADJ., aby automatycznie zoptymalizować obraz RGB.
Dostosuj rozmiar obrazu i kąt projekcji.
[Ostrość]
Obracaj pierścieniem ostrości lub przestaw dźwignię ostrości.
[Zoom]
Obróć pierścień zoomu.
<model z krótką projekcją>
Regulacja na wyświetlonym pasku ZOOM CYFROWY.
1. Naciśnij przycisk ZOOM na pilocie zdalnego sterowania.
2. Naciśnij przycisk lub .
[Kąt projekcji (nóżka regulacji przechylenia)]
1. Podnieś przednią krawędź projektora.
2. Naciśnij i przytrzymaj dźwignię nóżki regulacji przechylenia.
3. Opuść przód projektora na żądaną wysokość.
4. Zwolnij dźwignię nóżki regulacji przechylenia.
WSKAZÓWKA:
Funkcja automatycznej korekcji zniekształcenia trapezowego jest włączona fabrycznie.
Wyłącz projektor.
1. Naciśnij przycisk
(POWER) na obudowie projektora lub przycisk STANDBY na pilocie zdalnego
sterowania.
2. Naciśnij ponownie przycisk
(POWER) lub STANDBY .
3. Przesuń osłonę obiektywu w lewo, aby zasłonić obiektyw.
<model z krótką projekcją>
Załóż pokrywkę obiektywu.
4. Odłącz wszystkie kable.
© NEC Display Solutions, Ltd. 2015-2016 Ver. 2 2/16 Printed in Thailand
Select a source.
Connect your computer.
Connect the supplied
power cord.
Turn off the projector.
< Short-Throw model >
Remove the lens cap.
Turn on the projector.
x 2 times
or
or
or
Standerd models / Full HD models M403W / M363W / M323W / M403X / M363X / M323X / M283X / M403H / M323H
Short-Throw models M353WS / M303WS / M333XS
Fn F1 F
12
2
1
3
Slide the
lens cover.
[THROW ANGLE (Tilt foot)]
Adjust an image size
and the throw angle.
< Short-Throw model >
Press the ZOOM button.
[ZOOM]
[FOCUS]
TIP:
AUTO ADJ.
COMPUTER IN
Lens cap
ImageImage Image
Adjustable
Tilt foot lever
Focus ring
< Short-Throw model >
Focus lever
Zoom ring
NOTE: The color of the POWER indicator
RED or ORANGE
< Standby >
BLUE
< Power On >
TIP: Automatic Keystone Correction function
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec M353WS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec M353WS in the language / languages: Dutch, Danish, Polish, Turkish, Norwegian, Finnish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec M353WS

Nec M353WS User Manual - English - 166 pages

Nec M353WS User Manual - German - 166 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info