Manual Neato Botvac Connected D3 (page 8 of 164) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

655773

Zoom out

Zoom in

1/164

IMPORTANT

Remove all protective lms and shipping

material from the robot and charge base.

If they are not removed, your Neato robot

will not operate correctly.

Place the rounded side of your Neato robot

against the metal charging contacts on the

charge base until the contacts are pushed

all of the way in. For best results, charge the

robot fully before your rst cleaning cycle to

experience a full high performance cleaning.

NOTE During bootup, the robot will

alternately blink green and blue.

NOTE Your robot is only compatible with the

included charge base.

Plug the power cord securely into the

charge base.

Adjust the length of the cord by wrapping

it as shown.

REMOVE FILMS AND STICKERS INITIAL ROBOT CHARGING

SET UP CHARGE BASE

1 3

Choose a wall outlet that has a 3’ (1 m)

clearance on both sides and in front of the

charge base. This helps your robot nd the

charge base.

Plug in the power cord and push the charge

base against the wall.

TIP Locate the charge base on a hard oor

surface.

TIP Make sure the power outlet is not

controlled by a switch.

Charging

Contacts

Preparation and Set Up

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Neato Botvac Connected D3 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Neato Botvac Connected D3

Neato Botvac Connected D3 Additional guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Neato Botvac Connected D3 Manual

Product: