688837
5
Zoom out
Zoom in
Previous page
1/8
Next page
PFC0300-24CH10S – 24V 10A
Description Technical Features
Input voltage 100VAC – 240VAC ±10% Universal
Frequency 50Hz - 60Hz
Output - Boost Charge 28,8V (2,4V/Cell)
Output - Float Charge 27V - 27,8V (2,27V/Cell)
Output current 10A ±0,5A
Short-circuit protection Auto reset at the end of short-circuit condition
Reverse polarity protection Auto reset at the end of reverse polarity condition
Additional protections Safe connection without sparkles on output and input
Thermal protection against overtemperature
Dimensions L145 x W128 x H56.5 mm
Weight 1,33kg (cables excluded)
PFC0360-24CH12S – 24V 12A
Description Technical Features
Input voltage 100VAC – 240VAC ±10% Universal
Frequency 50Hz - 60Hz
Output - Boost Charge 28,8V (2,4V/Cell)
Output - Float Charge 27V - 27,8V (2,27V/Cell)
Output current 12A ±0,5A
Short-circuit protection Auto reset at the end of short-circuit condition
Reverse polarity protection Auto reset at the end of reverse polarity condition
Additional protections Safe connection without sparkles on output and input
Thermal protection against overtemperature
Dimensions L208 x W111 x H56 mm
Weight 1,56kg (cables excluded)
11
3. CHARGING CURVE SELECTION
Before installing and using the charger, please set the most suitable charging curve
according to the type of battery to be charged; the device is equipped with DIP-
SWITCH to select various charging curves, as shown in the following table:
DP1 DP2 PHASES DESCRIPTION
OFF OFF IUIa - AGM For AGM batteries
OFF ON IUIa - Acd For Lead Acid Flooded traction batteries
ON OFF IUUa
Generic curve for GEL and AGM batteries
(Default setting)
ON ON IUIa - GEL For GEL and all Lead Acid Flooded batteries
The DIP-SWITCHES are behind a black plastic cover on the front panel of the
device, so in one of the two shorter sides.
In some models, there are 4 DIP-SWITCHES but it should be considered only the
first two on the left, the other two are of no use.
4
DP1 DP2
ON
ON
DP3 DP4
ON
ON
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NDS Power Charger Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NDS Power Charger Pro in the language / languages: English as an attachment in your email.

The manual is 9,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info