688837
3
Zoom out
Zoom in
Previous page
1/8
Next page
PFC1200-24CH30S – 24V 30A
Description Technical Features
Input voltage 100VAC – 240VAC ±10% Universal
Frequency 50Hz - 60Hz
Output - Boost Charge 28,8V (2,4V/Cell)
Output - Float Charge 27V - 27,8V (2,27V/Cell)
Output current 30A ±0,5A
Short-circuit protection Auto reset at the end of short-circuit condition
Reverse polarity protection Auto reset at the end of reverse polarity condition
Additional protections Safe connection without sparkles on output and input
Thermal protection against overtemperature
Dimensions L280 x W134 x H77.2 mm
Weight 3,13kg (cables excluded)
PF36CH25S – 36V 25A
Description Technical Features
Input voltage 100VAC – 240VAC ±10% Universal
Frequency 50Hz - 60Hz
Output - Boost Charge 43,2V (2,4V/Cell)
Output - Float Charge 40,5V – 41,7V (2,27V/Cell)
Output current 25A ±0,5A
Short-circuit protection Auto reset at the end of short-circuit condition
Reverse polarity protection Auto reset at the end of reverse polarity condition
Additional protections Safe connection without sparkles on output and input
Thermal protection against overtemperature
Dimensions L280 x W134 x H77.2 mm
Weight 3,13kg (cables excluded)
13
1. INTRODUCTION
This manual contains important operating and safety instructions, please read and
understand it before using the device.
1.1 SAFETY NOTES
Before each use please check the battery charger, the connection cable and the
connector. If any malfunction is detected do not use it! It is strictly forbidden to
open the device. Repairs may only be carried out by qualified technicians using
original spare parts. A charger, a cable and / or a damaged connector increases
the risk of fatal electric shocks.
Do not place the charger on highly flammable surfaces or environments (ex .:
paper, cloth etc ...). The overheating of the device during the charging phases
can increase the risk of fire.
During operation the device should be placed in a well-ventilated place.
If the power supply cable is damaged it must be replaced by a qualified
technician to eliminate the risk of accidents.
1.2 WARNING
NEVER charge a cold or non-rechargeable battery!
Keep the device out of the reach of children
The device must be protected from sunlight or direct heat sources to prevent
overheating.
To reduce the risk of malfunctions do not block the ventilation bores.
DO NOT install the unit in a sealed environment, otherwise it may overheat.
To avoid the risk of electric shock and / or fire, make sure that the power
supply system is in good condition.
DO NOT use the charger with damaged cables and / or with inadequate
section.
DO NOT use the battery charger in an environment with high humidity or in
direct contact with splashes of water and / or other liquid or in the rain.
2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NDS Power Charger Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NDS Power Charger Pro in the language / languages: English as an attachment in your email.

The manual is 9,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info