27695
115
Zoom out
Zoom in
Previous page
1/116
Next page
PiN 570 | User Manual
115
Battery
Please read and follow the handling instructions for the battery before use. Improper use of the battery may
cause heat, fire, explosion, damage or capacity deterioration of the battery. However, the manufacturer will
not guarantee against any accident caused by the usage which is not written here.
DANGER
Do not dip or wet the battery in water, seawater, or other liquid. If the protecting pin assembled in the
battery is damaged, the battery may be charged with an abnormal current and voltage, which may
result in the cause of heat generation, explosion, or fire of the battery.
The battery has a predetermined polarity. If the battery will not connect well to the charger or
equipment, do not try to connect the battery forcefully. Check the polarity first. In the case the battery is
connected in reverse, it is charged reversely and may cause acid leakage, heat generation, explosion,
or fire due to an abnormal chemical reaction.
Do not put the battery into a fire or heat it. In such a case, the insulator in the battery may be melted,
the safety vent and structure may be damaged, all of which may cause heat generation, explosion, or
fire.
Do not connect the battery reversed in positive (+) and negative (-) terminals in the charger or
equipment. In the case the battery is connected in reverse, it is charged reversely during charge, and
causes an excessive current during discharge, and may cause heat generation, explosion, or fire due to
an abnormal chemical reaction.
Do not let the battery terminals ( + and - ) contact a wire or any metal ( like a metal necklace or a
hairpin ) with which it carried or stored together. In such a case, the battery is shorted and causes an
excessive current, which may result in heat generation, explosion, or fire.
Do not apply heavy impact to the battery, or throw or drop it. Strong impact may damage the
protecting pin, which may result in heat generation, explosion, or fire of the battery.
Do not drive a nail in, hit with a hammer, or stamp on the battery. In such a case, the battery may be
deformed and shorted, and the protecting pin may be damaged, which may cause heat generation,
explosion, or fire of the battery.
Do not solder the battery directly. Heat applied during soldering may damage the insulator or the safety
vent and mechanism, which may result in acid leakage, heat generation, explosion, or fire of the
battery.
Do not disassemble or alter the battery. The battery contains a safety mechanism and a protecting pin
in order to avoid any danger. If these are damaged, heat, explosion or fire may be caused.
Charge the battery every 6 months to the amount specified by the manufacturer, even if the battery is
not used. An excessive over-discharge may cause an abnormal chemical reaction, which may result in
the cause of acid leakage, or fire of the battery.
About the Infrared LED
The IR port located on the Pocket PC is evaluated as a Class 1 LED (Light-Emitting Diode) device according
to International Standard IEC 60 825-1 (EN60825-1) requirements.
CLASS 1 LED PRODUCT
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman PiN570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman PiN570 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman PiN570

Navman PiN570 User Manual - German - 120 pages

Navman PiN570 User Manual - French - 120 pages

Navman PiN570 User Manual - Italian - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info