707123
30
Zoom out
Zoom in
Previous page
1/59
Next page
With the LFO slider in the far right position there is full modulation by the LFO (0 ... 2x
depth).
At negative values the LFO phase is inverted.
[5] LFO: Adjust the amount of direct sample position modulation by the LFO. The maximum
range is defined by the ms - % slider [6]. In the ms position, the range is +/- 100 ms. In the %
position the range is the full length of the sample.
[6] ms - %: Sets the maximum range for the LFO modulation. In the ms position, the range is
+/- 100 ms. In the % position the range is the full length of the sample.
[7] ENV: Adjust the amount of sample position modulation by Envelope. The maximum range
is defined by the ms - % slider. In the ms position, the range is +/- 100 ms. In the % position
the range is the full length of the sample.
[8] ms - %: Sets the maximum range for the modulation by the Envelope . In the ms position,
the range is +/- 100 ms. In the % position the range is the full length of the sample.
[9] FEEDBACK: Adjust the amount of sample position modulation by the feedback signal.
[10] SAMPLE: Select one of 23 samples for the basis of your sound. Sample slots 24 to 30 are
free and can be used for your own samples if you are using the full version of REAKTOR (ver-
sion 5.6.2 or above). You can also replace the first 23 samples provided with your own sam-
ples. However, please save the Ensemble under a new name to avoid erasure of the original
samples.
[11] TRANSPOSE: Adjust the global pitch transpose [semitones].
[12] Sample Display: This area displays the selected sample and the position of the sample
playhead. In the full version of REAKTOR a WAV or AIFF file can be dropped here. It will re-
place the selected sample and will be stored with the Ensemble when it is saved.
Please save your Ensemble under a new name to avoid erasure of the original samples.
[13] Smoothing: Cutoff of a low-pass filter that smoothes the output of the fine position slider
and the small movements of the coarse position slider.
[14] SPEED: Use this to limit the speed of the coarse position slider.
1 = playback in original speed.
Overview of SKANNER XT Ensemble
Synth Engine Section
SKANNER XT - Manual - 30
30

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Skanner XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Skanner XT in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info