602923
32
Zoom out
Zoom in
Previous page
1/34
Next page
CONDITION POSSIBLE CAUSES POSSIBLE SOLUTIONS
No sound from all channels. • AC power unplugged. • Check AC cable connection and outlet.
• Power not switched on.
• Outlet has no power.
No sound from some channels. • Faulty/missing cables. • Check cables.
• Speaker connections faulty. • Check speaker connections.
• “Speaker Settings” channel (s) set to “O”. • Check “Speaker Settings” menu.
No sound from Subwoofer. • Subwoofer is o, not powered or improperly
connected.
• Power-up subwoofer, check Subs AC outlet
or check connections.
• Sub level set too low. • Correct subwoofer level by adjusting “SUB”
button at HTR 6.
VISO TWO does not respond to HTR 6
remote control.
• Batteries are at or incorrectly inserted. • Check batteries.
• IR transmitter window on remote or IR receiver
window on VISO TWO is obstructed.
• Check IR windows and ensure clear line-of-
sight from remote to VISO TWO.
• VISO TWO front panel is in very bright sunlight
or ambient light.
• Reduce sunlight/room lighting.
VISO TWO does not respond to front panel
commands or remote control.
• Microprocessor error. • Power down the VISO TWO via the front
panel Power button and unplug it from the
AC outlet.
• VISO TWO may have over heated. • Wait ve minutes, re-connect and power up.
The POWER is ON, but the internal DVD
player does not work.
• No disc is inserted. • Insert a disc.
No picture. • The TV is not set to receive video signal. • Select the appropriate video input mode
on the TV so that the picture from the
VISO TWO appears on the TV screen output.
• The video cable is not connected securely. • Connect the video cable into the jacks
securely.
• The connected TV power is turned o. • Power on the TV.
• HDMI connector is plugged-in and “HDMI Res.
is set to 720P, 1080I or AUTO.
• Unplug HDMI cable connected to rear
panel’s HDMI OUT.
• At DVD mode and with no disc loaded (“NO
DISC”)
1 Press and hold [DISPLAY] button. The lower
line of the VFD will show the current HDMI
resolution setting.
2 Use the remote’s [ ] keys or toggle
[MEMORY] button to select through
480P/576P, 720P, 1080I, AUTO or OFF.
Select either “480P/576P or “OFF” to enable
component video out, composite and S-Video
output. Stop at your desired resolution setting
and release [ ] keys or [MEMORY] button.
The playback picture is poor. • The disc is dirty. • Clean the disc.
The internal DVD player does not start
playback.
• No disc is inserted. • Insert a disc
• An unplayable disc is inserted. • Insert a playable disc (Check the disc type
colour system and Regional code).
• The disc is placed upside down. • Place the disc with the playback side down.
• The disc is not placed within the guide. • Place the disc correctly inside the guide on
the disc tray.
• A menu is on the TV screen. • Press SETUP button of HTR 6 to turn o the
menu screen.
• The disc is dirty. • Clean the disc.
Parental Control cannot be changed. • The password entered was wrong. • Enter the correct password.
• Password was forgotten. • Set the VISO TWO to factory default settings.
1 Place the VISO TWO into AM mode.
2 Press quickly the three front panel buttons;
[PLAY/PAUSE] then [STOP] then [DISPLAY],
holding the [DISPLAY] button for more than
7 seconds. The VISO TWO will switch itself
o then back on to DVD mode.
Note: Default password is 2580.
REFERENCE
TROUBLESHOOTING
32
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD VISO TWO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD VISO TWO in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD VISO TWO

NAD VISO TWO User Manual - German - 34 pages

NAD VISO TWO User Manual - Dutch - 34 pages

NAD VISO TWO User Manual - French - 36 pages

NAD VISO TWO User Manual - Italian - 34 pages

NAD VISO TWO User Manual - Swedish - 34 pages

NAD VISO TWO User Manual - Spanish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info